|Item Weight||1.9 pounds|
|Product Dimensions||10.5 x 7 x 2.7 inches|
|Item model number||200-121|
|Item Package Quantity||1|
Other Sellers on Amazon
+ $5.42 shipping
+ Free Shipping
+ Free Shipping
Dremel 200-1/21 Two-Speed Rotary Tool Kit
|Price:||$56.73 & FREE Shipping. Details|
|You Save:||$45.09 (44%)|
- Enter your model number above to make sure this fits.
- Two-speed simplicity is ideal for multiple applications & materials
- Two speed control allows you to set your speed at 15,000 or 35,000 rpm with a flip of a switch
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
- Lightweight design for comfort during prolonged use
Frequently Bought Together
Customers Who Bought This Item Also Bought
From the Manufacturer
The versatility of a rotary tool allows you to cut just about any material when used with the appropriate Dremel cutting accessory. Cut metal, wood, hard materials (such as marble, concrete, brick, porcelain, ceramics and hard epoxy), drywall, tile, grout, and much more.
Two Speed Control
Two speed settings allow you to use the low speed for cleaning applications and using brush accessories, and high speed for routing, cutting and sanding applications.
Sealed Ball Bearing Motor
For cool running and longer tool life. Also promotes smooth and quiet operation.
Light and Compact
Lightweight and small footprint design for comfort use in hand.
What's In The Box?
Carving/Engraving: 194 High Speed Cutter
Cutting: 420 Cut-off Wheel, 426 Fiberglass Reinforced Cut-off Wheel, 561 MultiPurpose Cutting Bit
Grinding/Sharpening: 83142 Silicon Carbide Grinding Stone, 8193 Aluminum Oxide Grinding Stone, 84922 Silicon Carbide Grinding Stone, 932 Aluminum Oxide Grinding Stone
Cleaning/Polishing: 414 Small Felt Wheel (2), 425 Emery Wheel (2), 421 Polishing Compound, 429 1" Felt Polishing Wheel (2)
Sanding: 407 1/2" Sanding Drum, 432 1/2" 120 Grit Sanding Band, 445 1/2" 240 Grit Sanding Band
Miscellaneous: 401 Screw Mandrel, 402 Mandrel, 415 Dressing Stone, Wrench
Multipurpose Cutting Guide attachment
- Dremel 200 Rotary Tool
- 1 Attachment
- 21 Accessories
|Dremel 4200||Dremel 4000||Dremel 3000||Dremel 200||Dremel 100|
|Speed Range||5,000 - 35,000||5,000 - 35,000||5,000 - 32,000||15,000 and 35,000||35,000|
|Number of Speeds||Variable||Variable||Variable||2||1|
|Separate On/Off Speed Control||✓||✓|
|Accessory Change System||EZ Change||EZ Twist Nose Cap||EZ Twist Nose Cap||Wrench||Wrench|
Top Customer Reviews
I have to install some new vanity light boxes, and hope to use the drywall attachment and cutting tool to cut the circles. I hadn't really checked out the attachements when I bought the item so am grateful for it's inclusion, otherwise I don't know how I would cut the circles. Update - need lots of practice here, my circles were not quite circles, but the drywall tool cut 5/8" drywall very easily!
It certainly is easier to use a Dremel than suffer from the repetative motion of using a hacksaw or a rasp on metal.
Can't wait to find other uses.
A tip - make sure to practice cutting or grinding to get used to how the Dremel handles.
Specs are low speed 15,000, high speed 35,000 rpm. Both have problem at low speed.
One unit varies at high speed, you can hear it.
I rigged an R/C hobby tachometer to the units.
One unit runs 5,000 rpm on low and the other moves between 3000-4000rpm.
Very poor design. Low speed is useless. Absolutely no power to polish anything.
This is a Dremel and I paid a higher price for Dremel quality.
Just plain junk. Sent both back for refund.
Examples: A loose bolt on the side of the toilet near the tub. My bolt cutters didn't have enough clearance. Copper and PVC pipe in the bathroom vanity below the sink where once again, clearance was limited and the angle would have been hard for me to get any power into a manual saw. Trimming the baseboard near the floor that I can't imagine doing any other way.
My only complaint is that I find it difficult to grip without covering the vents and have played with different positions with mixed results. I'm a woman, so, my hand is smaller than that of most men but I also need to use both hands quite often to hold it. I also wish I had spent the money on a higher end model with more attachments AND more speed options because I use it much more than I initially thought I would.
The spiral saw cutting attachment has a smaller hole opposite the main access opening to which the flexible hose of a mini-vacuum can be duck taped, and in turn to a full-size vacuum's larger hose. With a 1/8 cutting channel there's more sawdust than a regular saw, more than a mini vac might take, but the vacuum gets all but a little from the bottom of a work piece.
Can cut quite thick pieces by doing each side separately. To get straight cuts clamp a scrap board as guide onto the material cut.
Handy in being more compact than ordinary saws, for the occasional use. Stows in a kitchen drawer.
Most Recent Customer Reviews
Very good rotary tool. Be sure to use Dremel accessories, as they are high quality.Published 5 months ago by Chris G
The perfect tool needed form my project.
It has lots of great attachments to use that I know will be very useful. Read more
Well, I guess it does but its not usable. Low speed is super slow and has no power. Certainly not the advertised 15k RPM. Read morePublished 23 months ago by R. Muller