Customer Reviews

Dustless Technologies MU405 Cougar Ash Vacuum, Black

5 star:		(24)
4 star:		(8)
3 star:		(6)
2 star:		(4)
1 star:		(7)

 

 

With a fat Amazon gift certificate burning a hole in my jammies, visions of a clean coal stove danced in my head. I had been lusting after one of these ash-vacs for years, and now finally, it would be mine...

Boy do I wish I had read a review like this one prior to purchasing this vacuum (which I will return tomorrow). Didn't even have to dirty it, reading the instructions was all it took. Unfortunately, it required getting in to my livingroom to figure this out, since in none of the online descriptions at various sites, including Amazon, did it mention that this unit is for FINE ASH ONLY. In other words, the steel nozzle opening, approximately the diameter of a nickel, is designed to admit fine powder ONLY, and even that in small bits with the nozzle pressed against the firebrick in a "small circular pattern", allowing the ash to "sift" into the hose incrementally. (The instructions went on to detail all the various ways the thing could get itself plugged up...)

HELLO! Has anyone out there ever heated with solid fuel full time? It would take all day to suck up ash in that manner, not to mention that burning wood/coal does not produce exclusively fine ash. For coal especially, clinkers - the molten residue of trace minerals found in anthracite coal, are part of the bargain, and are produced in such abundance that it would render this tool effectively useless for coal burners.

In addition, though the hose is metal, intimating that the odd live coal is no biggie, the filter system in this thing is CLOTH - ie. you can burn holes in it with live material. Then it leaks. Right.

I'll have my 200+ bucks back and suck my ash chamber out with my shop vac, thanks - especially since the stuff would have to be cool anyway. (You can buy fine particle filters and bags at Home Depot). So much for my simplified stove cleaning fantasies...Oh well.

I purchased this ash vacuum less than one month ago for use with a pellet stove. In that time, and with only light use, the "flexible" hose has cracked, the motor is making a funny noise as it winds down, and the suction is significantly decreased long before the canister needs emptying. I would never buy this again, and would recommend to anyone needing an ash vac to look elswhere.

You know I read and yes, re-read those other reviews prior to going out and purchasing mine. I on one hand was using my own personal vacuum (wind tunnel hoover) to pick up the ash that my fireplace insert pellet stove was producing and I clean mine everyday. Using a ordinary vacuum is insane to say the least and messy so I finally went out and looked at the vacuums and came to this one online at Amazon but I went to my local fireplace center and purchased it there - to avoid shipping cost and they wanted nearly $270.00 for it but I got it at the same price as Amazon just no shipping - Well I LOVE IT - no mess not too loud - (the dog barks at my regular vacuum) no dog barking at this one. The flexible tube I have no issue with as of yet - it moves with ease and no cracking - no problems, no mess - I must tell you that it does not come with tools and I use and need the tools so I purchased them separetly well dont use your own vacuum tools they fit and why spend the $15.00 as you have no where to store them on the vacuum anyways. This vacuum is intended to pick up ash - not the hard stuff that looks like volcanic stuff that sits in the pan - just the ash and for us, no problem it does the job that my vacuum was dying over.

If you have a pellet stove, this vacuum is an absolute must. I don't really see the benefit of using it for a fireplace, though; we have a wood-burning furnace and continue to use a shovel to clean it out. The crimped nozzle design and the idea of vacuuming with the nozzle against the firebrick to only pick up ash and leave solids behind sounds good, in THEORY. The problem is that the solids quickly build up around the nozzle from the suction and any particles too large to fit inside the nozzle get stuck there the second you lift the nozzle to position it elsewhere. This design would work if there was perhaps a screen fitted over the nozzle to prevent this from happening.

To clean a pellet stove, though, it is absolutely ideal. Pellets are small enough to get picked up by the nozzle without any problems. Also, as anyone with a pellet stove knows, these stoves are a real nightmare to clean by hand because of the many parts involved that need to be cleaned on a regular basis - not only do you have an ashpan to empty, you have to clean a burnpot, air inlet chambers, heat exchanger tubes, etc. It used to take me over an hour to try and clean this with a brush and small shovel, and it always made a huge mesh. This vacuum has really simplified this chore and made it a breeze!

This review is for the Ash-less Cougar Ash Vac. I used it only three times. I bought this to use with a pellet stove. Even new this has little suction compared to shop vacs. I bought it for the special ash filters which did seem to work. If it only had good suction. But shop vacs with a good HEPA filter work just as well in that regard with a lot more suction. I used mine only a few times when I decided to use a shop vac. What a difference. I was going to sell it on ebay when I noticed the inlet mount for the hose was cracked. So I kept the couple of big filter clamps and threw the thing out in the trash. Those were expensive clamps. You can't suck up hot ashes with either vac so the Ash Vac is unnecessary for 3 or 4 times the cost. Plus you can get the shop vac filters cheaply anywhere but the Ash Vac has exclusive expensive filters. Hope this prevents somebody making the same mistake I made.

We purchased an ash vacuum cleaner for our pellet stove on the advice of a friend. He mentioned that he used a Loveless Ash vacuum and was well pleased. So we decided to shop online and found a good deal on one. We were happy with the order process, pricing and the speediness of the delivery, but none of that could compare to our overall pleasure for the product itself.

This thing works wonders, was quick to put together and great on function. I'd recommend this product to anyone that needs to vacuum up ash and as not tried it. No conventional vacuum can do what this can - I originally tried using one and made a major dust storm in the house! No fun cleaning that one up! With this Loveless vacuum, there is no dust in the air, no concern about slightly hot "coals" with the metal hose, so no worries at all.

Great product!

Solidly built and well constructed. My main criticism is that it does not come with any tools. Although I ordered the tools at the same time as I ordered the vacuum, they were shipped separately and I was billed for two shipments.

The manual is also a bit limited and it left me with some questions. For example, how long can I expect a filter set (expensive) to last. How can I tell when I need to empty the vacuum (very dirty job - you want to do this as seldom as possible).

I was using my shop vac to clean out the pellet stove and the filter was constantly clogging up. I have used the Loveless ash vac several times now and it is very efficient. Quiet might be a bit of an overstatement but it gets the job done!

For years I have used my shop vacs to clean a wood stove and chimney; and recently my pellet stove, only to have my home fill with large, ominous clouds of soot, floating and landing through out my house. When I tried to clean my pellet stove, I acquired an explosion at and on the couch. Wives are probably all the same in that this is...unexciting.
Who cares that this vacuum is loud, it doesn't exhaust weeks of silt all over the house.
Who cares that this vacuum can't inhale a bag of marble chip size/weight coals (use a shovel), it doesn't exhaust weeks of silt all over the house.
Who cares that it is 200+ bucks, it doesn't exhaust weeks of silt all over the house.
This vacuum sucks!

What a disappointment. It works extremely well in removing the ash from an ash tray. Does a superb job. Try it in a woodstove, however, and the hose clogs in about three seconds - not even counting the chunks which clog the entrance to the nozzle, which is waaay too narrow to be useful. Even a modest quantity of cool powdered ash chokes the hose requiring disconnect and clearing of the plug. Sorry to say, it does not begin to do the job. It might work if the hose diameter were doubled.