The Elga ULXXXSCM2 Purelab Ultra Scientific water purification system has total organic carbon (TOC) monitoring and a point-of-use dispenser with programmable volume control and 2 liters per minute (LPM) delivery. It has a dual-wavelength (185/254nm) UV lamp for photo-oxidation of feed water that reduces TOC levels to less than 10 parts per billion (ppb). A 0.05 micron filter module removes bacteria and particulates from feed water. The system requires up to two purification cartridges (sold separately) for operation, and also requires potable water pretreated by reverse osmosis, ion exchange, or distillation. It has an inlet water pressure range of 1.0 to 10psi. The microprocessor-controlled digital display shows purification system values and has programmable volume control. An RS-232 interface allows data to be sent to a computer or printer (both sold separately). This Type 1 water purification system meets Clinical and Laboratory Standards Institute (CLSI), and Clinical Laboratory Reagent Water (CLRW) standards for ultrapure water, and is suitable for molecular biology, microbiology, and analytical chemistry applications.
|Total organic carbon (TOC)||3 to 10ppb|
|Filter module||0.5 micron|
|UV lamp||Dual range|
|Flow rate||Up to 2LPM|
|Feed water pretreatment requirements||Potable water pretreated by reverse osmosis, ion exchange, or distillation|
|Feed water pressure range||1.0 to 10psi|
|Input power||100 to 240V, 50/60Hz, 75W|
|Standards met||CE, UL, CSA, CLSI-CLRW|
|Dimensions||490 x 410 x 365mm (H x W x D)|
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Elga LabWater manufactures water treatment solutions for laboratory, research, and healthcare industries. The company, a subsidiary of Veolia Water Solutions and Technologies, was founded in 1937 and is headquartered in High Wycombe, Buckinghamshire, UK.