Customer Reviews

Elizabeth Karmel's Silicone-Coated Steakhouse Burger Press

5 star:		(5)
4 star:		(3)
3 star:		(1)
2 star:		(2)
1 star:		(4)

 

 

This has a lot of good things going for it.

The silicone coating is thick, resilient, and releases the hamburger patty (intact) with little effort. This is such a good idea that I'll very likely never buy another press that doesn't have a silicone lining. Those of you who have tried other presses, particularly the metal ones, and had the patty stick and fall apart after the press is opened probably know what I mean.

The ram allows very firm pressure for a tight, round patty.

The size is really good for a quarter-pound burger. I tried third-pound burgers with mine, but I think a larger diameter would be better for those as they came out thicker than I wanted them. It would be nice if they offered this in two sizes, with a larger diameter for heavier burgers. That way the heavier burgers could be made bigger (in diameter), without getting thicker.

The thumb print seems like a gimmick, but does work, particularly when using meat that has a lower fat percentage. I've found that the higher fat meats, like the traditional 80% meat/20% fat chuck, still tends to end up more like a meatball than the lower fat alternatives like 93%/7%, especially when using more meat. This is because the higher fat content meat shrinks more, and a small diameter with a thick middle will turn out looking more like a ball than a burger.

The little silicone cap, which comes off for cleaning, is nearly impossible for me to get back on. The tolerances are so close that it sometimes takes me longer to get that thing back on than to make the burgers themselves. Perhaps individual units vary a bit, but the one I have needs either a little larger cap, or a little narrower post. I tried drilling a small hole in the post in case air pressure was the problem, but it didn't help. Eventually I'll probably try sanding the post to reduce the tight fit, but I haven't done that yet.

I make the burgers by purchasing 2-3 pounds of 93%/7% ground chuck that is very cold (but not frozen). I use a digital kitchen scale to measure out four ounce balls of meat. I put them in the press one at a time, flatten them with my hand, then press down on the ram with all my weight. This makes crisp, round burgers that won't fall apart later when cooked. The soft silicone lining means you can rap it against a cutting board and it will pop out in one piece. (Hint: if yours is leaking around the edges, try using colder meat. Warmer meat is more likely to flow around the gaps and also to stick.)

As I make each patty, I put it on a foil lined baking sheet, thumb print side up. When I've finished all the patties, I put a sheet of wax paper over them and put them in the freezer for a few hours until they are hard. Then, I take them out, put them in foodsaver bags (ziplocks will work too), separating them with squares of wax paper cut from the sheet that was over them while they froze. Then the bags go into the freezer, and I can pull one or more patties out whenever I want to cook them.

To cook them, I put them on a hot, preheated cast iron grill pan, or outside on the grill, thumbprint up. After around 4-5 minutes (time will vary depending on the temperature of the pan or grill), juices will appear on the top. That means that the burger is now thawed all the way through, because as long as ice remains in the center, the top will stay cold and juice-free. At this point I usually carefully lift and turn the burger about a quarter turn and leave it for another minute for nice looking grill marks. Then, I flip it and leave it for about the same amount of time (including the quarter turn). I use an instant-read thermometer to check the center for doneness, around 160 degrees for well done. If it is close to 160, you can go ahead and take it off as the internal temp will rise around five more degrees after you take it off the grill. Just don't cut it for a few minutes or the juices will all run out due to the heat.

I put the buns on the grill for a short time to toast them on the side that faces the burger. It makes the bun stand up to the burger and condiments better, and lends a nice warm fresh taste to the whole thing. I also use field greens instead of standard lettuce for a more upscale taste and look, but other lettuces, like romaine, also work well.

Overall, I've found this to be a very cost-effective way to make my own, lower-fat burgers for much less money than buying the premade frozen versions.

Recommended, with a few reservations. It isn't perfect, but this is probably the best press currently on the market.

Sean P. Logue, 2008

I have over half dozen burger presses....plastic, aluminum, non-stick, etc.
This is the first one that the formed patty slides out of the base, so quickly and so easily. All of the non-stick presses that I have tried simply did not work....same for the plastic ones. The meat whether cold or at room temperature, would always stick. I'd have to pry the meat out of the press, destroying the patty shape in the process.
This Grill Friends Press is absolutely awesome. Burgers form easily, with little pressure, and are not overly compressed. The meat does not press out of the sides, as in other presses. After forming the patty, all you have to do is remove the top, by pulling up on the side of the upper body of the press. Don't pull by the red cap. I weigh the meat portions for uniformity of patties. The red cap, and the black parts of the press are made of plastic, while the red inner part of the base is made of silicone.
I recently disposed of all the old useless plastic hamburg presses that I have accumulated, over the years. Each one of them could have been a good
press if they only had that silicone lining in the base, as does the Grill Friends Steakhouse Burger Press.

Pluses
- Easy to clean (dishwasher safe)
- Burgers come out easily
- Makes "perfect" burgers

Minuses
- Plastic top comes off when "separating" after making a burger.
- Hard to pull apart after making a burger.

Overall a nice product and I'm very happy with it.

This press makes pretty good burgers as long as they are on the large size. Making thin patties is very difficult as they tend to fall apart when trying to get them out of the press. Also, after the first patty or so, the meat begins to stick in the press and one must turn the base over and pound to get the burger out. It is also important to centre your meat in the press and have it rolled in a uniform ball else the finished patty will be misshapen and an uneven thickness. I think the press is ok but my search will continue for something better.

This is a terrific product. I haven't had any problems with parts separating. I make 4 oz - 6oz burgers, but I'm not sure you could really make a 3/4 pounder. The thumbprint really works! The whole things washes nicely in the dishwasher. I've had it all summer and have made dozens of burgers and run it through many dishwasher cycles. I highly recommend it.

I bought this burger press because I make my own chop meat and enjoy hefty burgers. This is the first burger press that I've owned so I can not offer you and comparatives. What I can tell you is that I can make some mean 1/2 pound burgers with a quality I control. The press is simple to use and your burger patties come out easily. The dimple on the press depresses a spot on your burger which helps the burger maintain it's shape and not become 'rounded.' My only regret is that this particular press is not available in a multi-burger platform as it is a chore to make one burger at a time. Especially if you have company coming by for a BBQ. Highly recommend

The product works really well as advertised. A chimp could run it. If I had a wish it would be that there was a version that made burgers of an even larger diameter lake 1 inch larger.

This burger press does what it was designed to do. I have had no problems with it. I would recommend it.

I was very disappointed in this product. After a few uses it is hard to get the burgers out of the bowl. I guess for nearly $16 I was expecting better quality and performance. Stay away, get something cheaper and you will be much happier!

about the third time I used it, I suddenly had 2 pieces in my hand. Just fell apart, would not recommend purchasing one.