These 3 Cctv Testers PRO is developed for the installation and maintenance of video monitoring system. It can be used for displaying video, controlling PTZ, generating images, capturing data of RS485 and testing LAN cable etc. Its functions, easy operation, and convenient portability enable it simple for the contractor to install and maintain the video camera, promote working efficiency and cost-down the expenditure of the project.
3.5"TFT-LCD , 960(H)×240(V)resolution
Digital Multimeter, performs AC/DC Voltage, AC/DC Current, Resistor, Conductivity,Capacitor and Diode test.
DC12V power output
Adjustable brightness, contrast, color of LCD
Video Level testing, video signals measured in IRE or mV
Automatically identify and adapt the video mode of NTSC and PAL
Colorbar Video signal generator, transmit/receive colorful images
Support more than twenty kinds of PTZ controller protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.
PTZ address scanning, search up the ID of PTZ camera
Capture the PTZ protocol to assist the setting personnel to find out the control protocol and therefore easily target the problematic equipments
Support RS232 and RS485 interface, the rate 150-19200bps
Powerful in testing LAN cable, measuring the connecting status and displaying the sequence of connection
PTZ(P/L & Zoom) Control: Control the status of P/L, zoom in/out the camera, adjust the aperture, foci and setting parameters,run and call the preset
Lithium Ion Polymer Batteries(3.7V DC3000mAh), more reliable, and work 15 hours
Easy for use that the train is almost unnecessary
1.CCTV system installation and maintenance
3.The CCTV transmitting channel testing
5.Lan cable testing.
1pcs 2,8" LCD Tester, EV-TESTER28D,
1pcs 3,5" LCD Tester EV-TESTER35,
1pcs 3,5" LCD Tester EV-TESTER35M (WITH MULTIMATER)