This ignitor is the "wide" type used by Trane and American Standard. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion of the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Trane and American Standard furnace models. PLEASE NOTE: If your existing ignitor plug has one "D" shaped prong, one "O" shaped prong, and a single latching claw, see part number T-IGN00030. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Trane American Standard part numbers B138196P01 and IGN00026.
This part is covered by the exclusive OneTrip Parts® two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized OneTrip Parts® dealer that you purchased the part from for details.
Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications.