Fisch TC90-100 Turning Center 6.6 Amp 10-Inch Swing by 15-Inch between Centers 1/2 Horsepower Benchtop Woodworking Lathe, 115-Volt 1 Phase

by Fisch

Product Description

From the Manufacturer

With heavy cast construction, the 1/2 hp motor on this turning center has an easy access speed change with 6 speeds, from 500 to 3700 rpm. It features 10-inch diameter turning, 2-1/2-inch tailstock spindle travel, and 15 inches between centers. And, it accepts easy mount bed extension, allowing up to 39 inches between centers. Other features include sealed bearings, a dust and chip deflector, indexable metal lockdowns, and a hollow tailstock for long hole boring. Your purchase includes a 3-inch face plate, 6-inch straight tool rest, double bearing live center, dead center, knock out bar, and spanner wrench.

Product Details

• Shipping Weight: 94.4 pounds
• Shipping: This item is also available for shipping to select countries outside the U.S.
• ASIN: B000051WSK
• California residents: Click here for Proposition 65 warning.
• Item model number: TC90-100
• Average Customer Review: 3.8 out of 5 stars  See all reviews (5 customer reviews)
• Amazon Best Sellers Rank: #588,490 in Home Improvement (See Top 100 in Home Improvement)

Customer Reviews

Most Helpful Customer Reviews

30 of 30 people found the following review helpful:

5.0 out of 5 stars Great little starter lathe, March 9, 2002

By 

JAMES A. COUSINS (TRAVERSE CITY, MI United States) - See all my reviews

This review is from: Fisch TC90-100 Turning Center 6.6 Amp 10-Inch Swing by 15-Inch between Centers 1/2 Horsepower Benchtop Woodworking Lathe, 115-Volt 1 Phase (Tools & Home Improvement)

This is a great little lathe, very quiet and very easy to use, assembly is minimal,about 10 minutes, is an excellent bowl turning machine and with the purchase of a 3 jaw chuck you will have an extremely versatile turning center.

10 of 10 people found the following review helpful:

4.0 out of 5 stars Good lathe, but shipping problems, July 27, 2003

By 

William Henning (Ponca City, OK USA) - See all my reviews

This review is from: Fisch TC90-100 Turning Center 6.6 Amp 10-Inch Swing by 15-Inch between Centers 1/2 Horsepower Benchtop Woodworking Lathe, 115-Volt 1 Phase (Tools & Home Improvement)

For the money, this is a good lathe. I particularly recommended it for those who, like me, would like to try wood turning, but do not want to sink alot of money into it at first. I've used it now for a few months now, made several small bowls and other pieces, and am enjoying it.

I would also recommend that a beginning turner get a good instruction book or guideance from someone experienced. I've found that good technique is important both for good results and for safety.

If it was not for shipping and service difficulties, I would have given the product the full 5 star rating. I ordered the lathe in early January, but did not receive it until March (this despite the words that it "usually ships in 1 to 2 weeks" shown continuously on the Amazon.com product page - which was irritating). When it arrived the plastic belt cover was cracked and barely functional. I sent 2 emails to the Fisch customer service department with no response. Finally on the third try, in which I also copied several in management, they did come thru and sent me a replacement part.

9 of 10 people found the following review helpful:

1.0 out of 5 stars beware of this lathe and the company, August 18, 2005

By 

sf woodworker (san francisco CA) - See all my reviews

This review is from: Fisch TC90-100 Turning Center 6.6 Amp 10-Inch Swing by 15-Inch between Centers 1/2 Horsepower Benchtop Woodworking Lathe, 115-Volt 1 Phase (Tools & Home Improvement)

I saw that this lathe had some good reviews and was american made so I bought one and had it shipped. I was pretty excited to get started so I cleaned the oil off and such and then I tried to turn the center stock wheel and it was jammed up and took two hands to get it to move. I thought well it must just need an adjustment so I loosened the guide pin a little bit and it unstuck but then the whole center stock was turning in the cylinder. so I tighted the guidepin again and it broke off in the cylinder. Im pretty mechanical so i dont think I over did it. I figured it was no big deal and went to put a piece of wood in the machine anyway just to try it . When I went to tighten the tailstock it wouldnt stay in place, I adujusted the lock nut underneath but It kept moving everytime I clamped down on the wood. It just wouldnt tighten enough to even hold a tool to the wood without going out of center. So I called Fisch and explained this to them and told them I wanted to send it back, and they said I had to send it on my dime, They guy I talk to was being a jerk and also trying to convince me that the problems I was having with the machine were my fault, I was pissed and theaten him and he finally agreed to take it back and give me a refund. I ended up buying a Jet.