- Aura Acoustic Imaging Technology
- Easy setup, 16 Images
- Eliminates stage noise
- Eliminates expensive mic setups
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
Product Features |
Product Details
Would you like to update product info or give feedback on images?
|
Product Description
From the Manufacturer
Aura Acoustic Imaging Technology in a familiar effects pedal format. Acoustic musicians can easily and accurately reproduce the sound of their instrument as miked in a professional studio.
Choose Your Pedal Each Aura Imaging Pedal is matched to a specific body style. We hand pick Images for each pedal from the most popular guitar and microphone combinations. This model is for use with all medium-depth classical and thin-body acoustic-electric nylon-string guitars. Note: Use only an undersaddle pickup with the Nylon pedal.
Easy to set up and use, Aura Acoustic Imaging Pedals eliminate intrusive stage noise and expensive microphone setups, allowing you reveal the true, unique voice of your instrument in any amplified performance.Features
- Six models feature 16 Images each for use with the most popular guitar bodies (Dreadnought, Concert, Orchestra, Jumbo, Nylon and 12 String)
- Volume, Blend, and Image Select controls
- Feedback-fighting Phase switch
- Bypass/Mute foot switch
- Input Trim with Clip/Low Battery indicator
- Designed for use with guitars featuring undersaddle or soundhole pickups
- Runs on 9V battery or power adapter
- 24 bit A/D/A; 32 bit internal processing
- Dimensions: 5.6'L x 4'W x 2.1'H
SPecifications
- A/D, D/A conversion: 24 -bit
- Signal processing: 32 -bit
- Power supply: 9V alkaline battery or 9VDC adapter
- Typical in-use current consumption: 18mA
- Typical 9V alkaline battery life: 27 hours
- 9V adapter: Fishman 910-R (for 110V) or suitable filtered and regulated, 2 00mA type, tip = negative
- Input impedance: 10M Ohm
- Nominal output impedance: 3 .5k Ohm
- Input trim gain range: -10dB to +2dB
- Maximum output level (onset of clipping): +2.4dBV
- Baseline noise: -92dBV (A-weighted)
- Dynamic range: 94dB (A-weighted)
- Phase switch: Left position = non-inverting
Product Description
The Aura Nylon acoustic guitar Imaging Pedal uses Fishman's exclusive Aura Acoustic Imaging Technology in a familiar effects pedal format, finally allowing acoustic guitarists to easily and accurately reproduce the sound of their instrument as miked in a professional studio.Easy to set up and use, Aura pedals eliminate intrusive stage noise and expensive microphone setups, allowing guitarists to achieve incredible recordings at home or in any live performance setting. Designed for use with guitars featuring undersaddle or magnetic soundhole pickups, this Aura Nylon Pedal is specifically designed for use with nylon string classical guitars.The Aura Imaging pedal features 16 Images, selected from their vast online library to cover a wide range of the most popular acoustic guitar models. A deliberately simple and intuitive control set offers Volume, Blend, and Phase allowing simple operation at home or on stage.Aura uses digital algorithms, developed in Fishman's audio labs, to create an image of the natural sound that microphones capture in a professional studio. This Image, when played through an amp, mixer, or PA, blends with your instrument's pickup to produce an immediate and dramatic improvement in your amplified sound.For the highest audio quality, the Aura Acoustic Imaging Pedal features 24-bit A/D D/A and 32-bit internal processing, and runs on a 9V battery or AC power adapter.The Fishman Aura Imaging Pedal looks great, too. It features the look of brushed steel top and bottom, and a black center section where the jacks are located.
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
3 of 6 people found the following review helpful:
1.0 out of 5 stars
Fishman Aura Imaging Pedal--Nylon String,
By
Amazon Verified Purchase(What's this?)
This review is from: Fishman Aura Imaging Pedal - Nylon String (Electronics)
I'm tweaker and am always looking for ways to improve my classical guitar tone. Of course a concert classical played acoustically is the ultimate in sound, but if you do causal gigs--weddings, dinners, etc.--you gotta amp it up. So I connected the Aura between my Hirade TH8S Classical Guitar and Trace Acoustic TA50R amp and started diddling the knobs.
Hmm, not one of the 16 preset programs sounded worth a darn. Most were muddy and unbalanced. Certain pitches like A and B-flat constantly feedback. I cranked down the mix from full to 50% and no improvement. Finally at 25% Aura and 75% guitar pickup I caught a glimpse of a decent tone. Still, plenty of feedback and I had to flip the phase switch every time I changed programs. I pressed the bypass and it was like the heavens opened in glorious tone and harmony. The straight guitar tone was by far the best. Finally I tried it through the effects loop and, it was a little better (post EQ), but basically the straight guitar trumped the Aura by a country mile. In fairness, the Cool Tubes pickup in my $2000 Hirade is excellent and the Trace TA50R is among the best acoustic guitar amps ever made. Kinda hard to improve on. Nevertheless, the Aura is a long ways from the sound of a studio mic. It sounds similar to an omnidirectional dynamic mic (like an old Shure) with all the wolf tones, frequency bumps and feedback. It's hard to get feedback outta my setup but the Aura somehow managed. The Aura is beautiful, well constructed but sonically flawed. The best thing about it is Amazon's great return policy.
Share your thoughts with other customers: Create your own review
|
|
Tag this product(What's this?)Think of a tag as a keyword or label you consider is strongly related to this product.
Tags will help all customers organize and find favorite items. |
Customer Discussions
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
