The digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view. Wide 1000V measurement range. Average responding AC measurements. 0.3 percent accuracy. 10 Amps continuous (20A for 30 seconds). Frequency and capacitance. Resistance and continuity. Meets measurement category 1000V CAT III and category IV 600V safety standards. Voltage range: 6.000 to 1000V AC/DC. Current range: 60.00 mA to 10A AC/DC. Resistance range: 600 ohm to 50 megaohms. Capacitance: 9999 microfarad. Frequency range: 99.99Hz to 99.99kHz. Surge protection: 8 kV peak per IEC 61010. Fuse for mA inputs: 440 mA, 1000V fast fuse. Fuse for A inputs: 11A, 1000V fast fuse. Display: digital - 6000 counts, updates 4/sec, bar graph - 33 segments; updates 32/sec, frequency - 10000 counts, capacitance - 1000 counts. Altitude: operating - 2000 meters, storage - 12000 meters. Operating temperature: -10 to 50 degree C, storage - -40 to 60 degree C. Battery life: 400 hours typical (alkaline). Measures 18.5cm length by 9cm width by 4.3cm height.