Customer Reviews

17
4.7 out of 5 stars
Your rating(Clear)Rate this item


There was a problem filtering reviews right now. Please try again later.

3 of 3 people found the following review helpful
on June 8, 2013
Verified Purchase
I bought this PoE splitter to use a non-PoE Foscam (FI8918) in a location where I didn't have a power outlet. I have a PoE switch in my garage to power my outdoor security cameras. I installed an Agasio A512-POE camera inside the garage to keep an eye on my tools only to discover that it put out so much RF interference that my garage door opener remotes no longer worked. The FI8918 didn't have this problem so I returned the Agasio and bought this splitter instead. It's hidden above the drywall in the garage ceiling with the camera mounted on the ceiling.

The only potential con I can think of is that output power wire from the splitter is only 5-6 inches long, so the splitter has to be mounted very close to the camera. In my case that worked out fine but I could see it causing problems for others if they wanted to hide the splitter.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 2 people found the following review helpful
on August 15, 2013
Verified Purchase
This product is required if you want to use 802.3af "real" PoE with Foscam products. I have this setup with a Foscam PT Dome Camera and a Cisco 300 series PoE switch. It was pretty much a plug and play install. The unit itself is a bit larger than I would have expected, but it was still small enough I could hide it in the wall one I took my wall plate off. The unit comes with a lot of different adapters for various DC plugs, so I could imagine if the voltage was correct as well as polarity, you could probably use this to make a lot of low power items PoE.

All that being said, I really wish all vendors would just switch over to 802.3af compliant PoE so I could stop buying adapters.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
2 of 3 people found the following review helpful
on August 7, 2013
Verified Purchase
I previously purchased a TP-Link PoE kit which was the wrong choice, so I returned it for this item and the Foscam Active PoE injector adaptor. It works great and was easy to install. Naturally, it comes with the connectors necessary to attach to any Foscam camera (the TP-Link only came with one power tip which was the wrong size).
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on December 10, 2014
Verified Purchase
I had ordered several POE splitters from other companies that did't work with my camera. When I saw this one I contacted Foscam to verify it would fit my needs. Impressive, they contacted me back within an hour and told me it would work. Being the typical male that I am, I didn't read the instructions, I opened the box plugged it in, and it works perfect!
Thanks Foscam for great cusotmer service!
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on March 4, 2014
Verified Purchase
Couldn't have been much simpler. This took an older Foscam camera and let me do away with a power cord hanging down the wall. PoE works the same as if it was a true PoE camera.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on February 11, 2014
Verified Purchase
This device work great, except when the IR LEDs on my FI8905W come on at night, then this device starts to cut on and off. I tested with 2 switches and cables as short at 6' but still does the same thing.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on January 30, 2014
Verified Purchase
Worked out of the box as advertised.
Will probably use theses in a lot of applications to convert Wifi cams
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on July 30, 2013
Verified Purchase
Now I do not need Power or a Strong Signal for my FI9805W. The only thing you might want is the 10Ft power extender since the one provided is 6 inches.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on September 6, 2014
Verified Purchase
Works well! My company has several Foscam IP cameras and using this splitter with our PoE switch, I'm able to run the cameras in locations and not have to worry about the nearest 110v wall outlet. We've been using the splitter for several weeks now.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
on January 26, 2015
Verified Purchase
Works as advertised. Has been in use for the last 3 weeks without problem. Will update with any problems. Using with a Foscam camera and POEf switch.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Questions? Get fast answers from reviewers

Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
See all 2 answered questions


Send us feedback

How can we make Amazon Customer Reviews better for you?
Let us know here.

Your Recently Viewed Items and Featured Recommendations 
 

After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.