GSM Activate's GSM Auto Dialler, latest security / monitoring / safety device - it connects to your electronic devices and alerts you remotely to your mobile phone when there is a problem!
The box is fitted with both inputs and outputs so you can even send a command back i.e for an alarm you could switch it off by using your mobile phone from anywhere in the world using 2G Technology!
Typical applications of product are -
1:Security Alarm System applications;
2:Supervision and monitoring alarm systems;
3:Automatic monitoring system;
4:Vending Machines security protection;
5:Pumping Stations, Tanks, Oil or Water levels;
6:Buildings and Real Estate;
8:River Monitoring and Flood Control.
How does the auto-dialer work ?:
The GSM network is used for the transmission of text messages for locations where transmission is not possible via fixed telephone lines.
It has 2 alarm inputs and one 10 Amp Relay output. When an input is activated The Blue Led will flash 6x times.
It will automatically dial out 3 pre-programmed numbers and an alarm text
message is sent. (Alarm 1 activate), or (Alarm 2 activate).
A typical alarm diagram is on page 5
When the auto-dialer has sent the text message, it will need to be reset,
This will happen automatically, when you reset the Trigger input signal, the
auto-dialer will reset.
RELAY OUTPUT: (All uppercase)
To turn ON the relay all you need to do is send a text message #ON
To turn OFF the relay all you need to do is send a text message #OFF
You can turn on the relay for 7sec to do this just send a text message
#PULSE This is useful if you need to reset some external equipment.
The relay has 10Amp contacts
COM = common N/O = normally open N/C = normally closed.
User Manual available on request