Have one to sell? Sell yours here
Generic Glass Touch Screen Digitizer Replacement Part + Adhesives + Tool Kit For HTC Droid Incredible
 
See larger image and other views
 

Generic Glass Touch Screen Digitizer Replacement Part + Adhesives + Tool Kit For HTC Droid Incredible

4.0 out of 5 stars  See all reviews (85 customer reviews)


Currently unavailable.
We don't know when or if this item will be back in stock.




Product Details


Customer Questions & Answers

Customer Reviews

Most Helpful Customer Reviews
13 of 14 people found the following review helpful
4.0 out of 5 stars Life Saver February 1, 2012
Verified Purchase
Does just as it advertises. Doesn't come with instructions, so be sure to look on youtube and other sites to get a good, thorough idea of what to do. The pry tool is pretty weak and will barely make it through the whole procedure, I suggest buying a good quality one before you start. Also be wary of what you touch as I left a fingerprint on the inside of the glass after I put it all together.

This item is perfect, good quality and relatively easy to apply. Absolute life-saver, especially since I was out of my warranty.

****HAVE THESE ITEMS IN ADDITION TO THIS SCREEN REPLACEMENT******
1 Small Phillips head screw driver- will need this for the "2nd" layer of removal
1 super small Phillips head screw driver (like an eyeglass repair kit size)-will need this for the "3rd layer."
Exacto Knife or a modelling knife (to remove leftover glass/adhesive)
Hair dryer (to heat up the glass for easier removal- THIS IS MANDATORY. this was the hardest part of the process for me).

Hope this helps, and good luck.
Was this review helpful to you?
9 of 9 people found the following review helpful
3.0 out of 5 stars Saved this phone May 28, 2012
Verified Purchase
Screen works looks to be OEM,it's been installed for a day and all the buttons work and no dead spots on the digitizer.

I'd give this a higher rating but...:
1) Missing mini phillips head screwdriver
2) The sticky tape provided really only is cut out for attaching the digitizer to the front bezel. But you need to take off the LCD to get at the digitizer so had to cut down bits of the leftover tape to reattach the LCD. I'm guessing it's possible to not glue back the LCD but rather not take the chance.
3) had to cut some of the pre-cut tape to make sure the button control/leds shone through.

Tips:
* Best vid on disassembly was from irepairfast on youtube.
* Will need mini phillips head screwdriver
* Get some silicon gloves for reassembly and handling the LCD (you don't fingerprints under the glass)
* When you remove the LCD put it into a sandwich bag to keep dust off it until you need to put it back in.
* Sharp scissors for cutting up tape
* reattach the LCD cable before laying down the motherboard
* Good idea to have a shammy to lightly swat NOT wipe dust off parts maybe a can of air but don't want to shoot out liquid onto any parts.
* treat the LCD like it's double the strength of a Ritz cracker... Be careful! so take time heating it up with a blow dryer (I used high for about 20 seconds...lightly pried...and then if it didn't come off EASY added more heat and repeat.)
* Scraped old adhesive with nice tweezers and then used acetone (nail polish remover) to finish the job.
* The pry tool is largely useless. But I still used it and most helpful with flipping up cable tabs and moving ribbons out.
Read more ›
Comment | 
Was this review helpful to you?
3 of 3 people found the following review helpful
4.0 out of 5 stars Nice quality but expect some things September 20, 2012
Verified Purchase
Ok I bought this expecting a tough replacement, but it was actually very easy. Everything was included to do the repair EXCEPT for the #0 Phillips screw driver...and the heat gun or hair dryer. Few things to mention that everyone failed to.

: the adhesive is very sticky...place the adhesive on the bezel NOT the glass.
: you don't need every bit of the adhesive. You only need the top and bottom portions of it. (the ones for the top and bottom of the glass. You can try to use the square part that's kinda cut for you, but you will need a razor blade to cut through it. It is not cut properly, so if you try and pry it apart you will stretch it and it will bunch up.
: if you use a hair dryer, heat both sides of the broken glass to make it easier to remove. The glass removal is the most time consuming part of the process. If you cannot remove it in one piece, wear eye protection because it shatters into pieces...and you will need to remove it one tiny piece at a time.
: use nitrile gloves ( BOTH OF THEM ) you really don't want to risk fingerprints on the inside of the glass.
: watch the LCD screen on removal, it can be a bit tough to remove if the adhesive is not heated up enough, so just keep the dryer on it while you are prying it off.
: save the yellow heat conductive tape you removed off the cables of the main board. You need them to protect the wires from excessive heat.
: keep the plastic glass film on the front side of the glass during the install...as well as the back film while connecting the main cable for the digitizer.
: have some qtips near you and some rubbing alcohol for cleaning fingerprints.
: like everyone has stated, the pry tool is a bit flimsy, but it lasted through the entire install for me...
Read more ›
Comment | 
Was this review helpful to you?
1 of 1 people found the following review helpful
5.0 out of 5 stars perfect replacement May 16, 2012
Verified Purchase
Other than the adhesive, I had no problem with this product at all. Well I would suggest a better tool kit. The pry tool broke after a minute of use. Other than that, the replacement screen, which I was mainly looking for, worked like a charm =)
Comment | 
Was this review helpful to you?
1 of 1 people found the following review helpful
5.0 out of 5 stars easier and cheaper than a new phone April 29, 2012
By Molly
Verified Purchase
I smashed the top half of my screen and this was my choice it cost a hell of a lot less than a new phone and it was super easy to install. It was so nice to have the adhesive cut so all you had to do was pull the backing off and stick no cutting not measuring just sticking. :D
Comment | 
Was this review helpful to you?
Most Recent Customer Reviews
5.0 out of 5 stars money saver
Using this kit I was able to repair the broken screen of one of my smart phones and save a significant amount of money. Read more
Published 5 months ago by Jason Mack
2.0 out of 5 stars Adhesive's a pain in the a##
My screen wouldn't light up once installed. Not saying they're related issues but its possible. You only get one try to correctly align the adhesives.
Published 6 months ago by Brent M.
5.0 out of 5 stars broken phone works like new!!
Was Hard To Install But Once Got It In Worked Like New On My Broken PhonE Saved Me From Buying WHole New Phone
Published 6 months ago by Vic
3.0 out of 5 stars Perfect, Just waited for a while
I have to say that this was a solid replacement for my htc incredible, but it took way too long to get this! It came from China and it seemed like a while month before I got it! Read more
Published 7 months ago by Zachary Thomas
5.0 out of 5 stars worked as it should
worked great! was able to fix my gf's phone with almost no problem. Price is right too. All in all im happy
Published 8 months ago by david christian
4.0 out of 5 stars Received but not used yet!
I received it on time but have not used it yet. As soon as I do, I will give an update on how good the product is.
Published 9 months ago by Grace&Mercy
3.0 out of 5 stars kit
The adhesive had to be cut up in order to work . Tools were sufficient for the job they were designed fo
Published 12 months ago by ronnie s. galloway jr.
3.0 out of 5 stars Easy but time-consuming install.
Youtube helped me a ton for DIY install.

This screen did crack after 3 months of use due to normal wear and tear. Read more
Published 12 months ago by michael berens
1.0 out of 5 stars no good for Iphones
The Iphone has the digitizer, lcd and glass all fused together. this is only the digitizer and front glass its useless and a waist of money.
Published 13 months ago by Nathaniel A Tucker
1.0 out of 5 stars Good luck
The product (phone replacement parts) were fine but the tools and adhesive were marginal. It took about 2 hours to try to fix the phone and I was unsuccessful. Read more
Published 14 months ago by JMS Architecture & Construction
Search Customer Reviews
Search these reviews only

Look for Similar Items by Category