- Telescoping aluminum frame for use as hand truck, forklift, or dolly
- Standard steel forks for lifting loads to a maximum height of 10' .5" (3.06 m)
- Capacity of 400 lbs (181 kg) for lifting heavy loads
- Lift weighs 145 lbs (65.8 kg) for compact and portable transport
- Single door access for ease of use
Genie Lift, GL- 8, Heavy-Duty Aluminum Manual Lift, 400 lbs Load Capacity, Lift Height 10' 0.5"
|Price:||$1,358.81 ($1,358.81 / each) & FREE Shipping. Details|
Specifications for this item
|Load Capacity||400 pounds|
|Maximum Lifting Height||120.5 inches|
|Number of Items||1|
<div style=... See more product details
Customers Who Viewed This Item Also Viewed
Frequently Bought Together
The Genie GL-8 is a material lift that can be used as a hand truck, forklift, or dolly. The telescoping aluminum frame makes the lift compact and lightweight, while steel forks make the lift more durable. The lift has a 10' .5" (3.06 m) maximum lifting height and a 400 lb (181 kg) capacity for lifting and moving heavy items.
Protects Flooring with Non-Marking Wheels and Dual Swivel Casters
It comes with non-marking 2" (5 cm) dual wheel front swivel casters, and 8" (20 cm) rear wheels for protecting floors when transporting items.
Designed for Easy Maneuverability and Storage
The lift has a hold-down bar to secure the aluminum mast during transport, and can fit through most standard doorways. Lifting power is provided from a standard winch, which is reversible for compact storage.
About Material Lifts
Material lifts are used for lifting a variety of loads such as installation of electrical fixtures, ducts, drywall, ceiling panels, and overhead sprinklers, among many others. For industrial use only.
About Genie Industries
Genie Industries, a subsidiary of Terex Corporation, was founded in 1966 with the introduction of the Genie Hoist, a portable pneumatic material lift. Genie is headquartered in Redmond, WA, and manufactures a variety of lifts, booms, light towers, and telehandlers.
Top Customer Reviews
This lift is wonderful.
The winch system raises and lowers the load precisely and locks in place when you get it where you want it. The large pneumatic tires let move easily. The smaller front castors are great on flat surfaces, but need attention on rough or uneven surfaces.
The forks flip upside down to give about two extra feet of height if you need it.
We used a lifting bar that straddled the forks and locked in place with pins to allow us to hoist with the pad eyes on things like motors.
Fantastic piece of equipment. Allows one or two people to safely move loads that would otherwise need five or six, if not a forklift.
At 145lbs you could throw it in a truck if you needed too. There are castors on the top to help you slide it in a truck.
It uses a cable winch and pulleys to provide the lift. Take care to wind the cable carefully and it will last a long long time.
It is sturdy and easy to use. Great for a tight spot, or open spot, and handles the load.
Most Recent Customer Reviews
Not your fault, It was designed to be used by the Sasquatch, I'm 85 and not up to it,Published 1 month ago by H. W. Pitman
only lifts to 8ft
states that it goes to 10 ft
product works good but wont go to height advertised