Grizzly G4015Z Combo Lathe/Mill

by Grizzly

Product Description

New and improved! We took our basic combination Metal Lathe/Milling Machine and increased its capacity and usability. Start with a lathe spindle bore of 3/4" and a longer bed. Then add more change gears, inch-cut lead screws, 4" 3-jaw chuck, reversing switch and so much more. This is an excellent machine for anyone, from the beginning machinist to the seasoned machinist. You get a lot of machine in a very small package with all the FEATURES you need for just about any job! FEATURES: ? T-slots in cross slide ? Cuts inch and metric threads ? Turret tool post ? 4" 3-jaw chuck ? Tailstock offsets 1/2" ? Built-in vise SPECIFICATIONS: ? Swing over bed: 16-1/2" ? Swing over saddle: 11-1/2" ? Distance between centers: 19-3/16" ? Spindle taper: MT #3 ? Mill drill spindle taper: MT #3 ? Draw bar: 3/8" - 16 TPI ? Tailstock barrel travel: 1-1/2" ? Cross slide travel: 4-1/2" ? Number of Mill/Drill speeds: 14 ? Speed range: 135, 175, 240, 295, 315, 380, 390, 490, 505, 635, 695, 900, 1055, 1370 RPM ? Number of Lathe speeds: 7 ? Lathe speed range: 185, 330, 405, 535, 680, 955, 1455 RPM ? Range of threads (inches): 8 - 120 TPI in 27 steps (Gear changes required) ? Range of threads (metric): 18 @ 0.2 - 3.0 mm ? Motor size (single phase 110V): 3/4 H.P. ? Shipping weight approximate: 475 lbs. STANDARD Equipment: ? 4" 3-jaw chuck ? 1/2" drill chuck ? MT#3 chuck arbor ? 2 dead centers ? Change gears ? 5" backplate ? 9-1/2" face plate

Product Details

Product Manual [2.83mb PDF]

• ASIN: B0000DD25P
• California residents: Click here for Proposition 65 warning.
• Average Customer Review: 5.0 out of 5 stars  See all reviews (1 customer review)

Customer Reviews

Most Helpful Customer Reviews

26 of 51 people found the following review helpful:

5.0 out of 5 stars LET HARRY DO IT., April 28, 2004

By A Customer

This review is from: Grizzly G4015Z Combo Lathe/Mill (Misc.)

Just starting up for retirement, alway did maintainace, and
they woulnot let me in machineshop to see how they did it.
so at 53 yr."ima" learning. This little lathe combo is nice.
ONLY PROBLEM IS A HARD SPOT DURING CHUCK TIGHTING AND LOOSING, AND HOPEFULLY , IT WILL CLEAR UP WITH USE. MY SON OF 11 YEARS OF AGE , JUST FINISHED MAKING OUR OWN LATHE GRINDER ,
LIVE CENTER , AND NOW WORKING ON OUR OWN TAPER ATACHMENT.
OH, YEA, IMA TRYING TO LEARN TO TYPE TOO.