Grizzly G8688 7" x 12" Mini Metal Lathe

by Grizzly

Product Description

Powered by a 3/4 H.P. motor, this lathe also features: variable speeds (0-2500 RPM), inch and metric reading dials, turret tool post, chip tray & splash guard. Features: ? Variable Speed ? 16 TPI Reversible Leadscrew ? Forward and reverse in all speeds ? Chip Tray & Backsplash Guard ? Threading Dial Indicator ? Standard & Metric Graduation Specifications: ? Swing over bed: 7" ? Distance between centers: 12" ? Spindle bore: 20mm ? Spindle nose taper: MT #3 ? Tailstock taper: MT #2 ? Tailstock travel: 2-1/2" ? Cross-slide travel: 2-3/4" ? Maximum tool bit size: 5/16" ? Speed range: Low Range: 0-1100 RPM, High Range: 0-2500 RPM ? Range of threads: 12-52 TPI ? Motor: 3/4 HP, 110V ? Number of thread pitches: 18 inch & 10 metric ? Net weight: 74 lbs. ? Shipping weight approximate: 89 lbs. Standard Equipment: ? 3" Three-Jaw Chuck with External Jaws ? 6-1/4" Face Plate ? Steady Rest ? Four-Position Turret Post ? Complete Set of Change Gears ? MT #2 Dead Center ? Wrenches

Product Details

Product Manual [640kb PDF]

• Shipping Information: View shipping rates and policies
• ASIN: B0000DCZ7D
• California residents: Click here for Proposition 65 warning.
• Average Customer Review: 4.0 out of 5 stars  See all reviews (2 customer reviews)
• Amazon Best Sellers Rank: #107,602 in Home Improvement (See Top 100 in Home Improvement)
  • #34 in Home Improvement > Power & Hand Tools > Power Tools > Lathes

Customer Reviews

Most Helpful Customer Reviews

90 of 90 people found the following review helpful:

4.0 out of 5 stars Nice lathe with good support from Grizzly, September 19, 2005

By 

Robotster (Wheaton, Illinois) - See all my reviews

This review is from: Grizzly G8688 7" x 12" Mini Metal Lathe (Misc.)

I have been interested in buying a lathe for hobby work and have done research and talked to people about their experiences. I was convinced that the Grizzly was the best choice for a few reasons. Basically, the level of quality in all of the lathes in this category is about the same since they are all manufactured in China by just a couple of manufacturers, so this was a wash in terms of which brand to choose. It came down to features, included accessories and convenience. The desirable features on this unit were the wider bed for work on longer pieces and the variable speed motor control. Being new to a tool like this, the fact that different materials require different cutting speeds would require gear changes on lathes without the speed adjustment. The ability to slowly bring a piece of work up to the proper speed is also important to a novice (like me) to determine if the work is mounted and centered properly on the chuck. The Grizzly box arrived in pristine condition, but that did not indicate a damage free shipment as the drip tray was bent in shipment. One call to the customer service group at Grizzly solved this by way of a new tray sent to arrive in just a couple of days. Nice, helpful people at Grizzly - this will be a strong point the next time I shop for a tool. I have turned a few items on the lathe already, and all seems fine. The slides have very little play and the chuck centers properly with almost no run-out. If you are new to this hobby, you will find the web site very helpful. They have an abundance of great info for the beginner and intermediate machinist. The fact that they had an in depth review and adjustment and set up pointers specifically for this lathe really made my selection a lot easier. Be ready to buy additional accessories to get up and running. A live center and a steady rest were included, but cutting tools and a Jacobs chuck are required items not included in the box.

50 of 60 people found the following review helpful:

4.0 out of 5 stars Nice mini metal lathe, April 9, 2005

By 

David G. Yan "dyyyy" (Sammamish, WA United States) - See all my reviews
(REAL NAME)   

This review is from: Grizzly G8688 7" x 12" Mini Metal Lathe (Misc.)

I just go one os these and I love it. Couple of things I found to be unexpected: (1) It's made in China I had expected to be made in USa since it's grizzly. (2) The threading gears are made of plastic along with some of the gears in the head housing. Other than that it run smooth and quiet.