The HI 9143W is a waterproof oxygen meter with a reinforced plastic polarographic probe and a 4 m (13’) cable for difficult-to-reach field applications. Calibration is manual at one or two points with included 7041S electrolyte solution, while 100 percent calibration is done in air.
The meter has a range of 0.00 to 45.00 mg/L O2 0.0 to 300.0% O2, 0.0 to 50.0 degrees C (+ or - 1.5% FS (O2), 0.5 degrees C) and a resolution of 0.1 mg/L, .1% O2, 0.1 degree C. The meter operates from 0 to 50 degrees C (32 to 122 degrees F), and automatically compensates for temperature (ATC) from 0 to 30 degrees C. Salinity and altitude values can be entered to allow the meter to compensate or these variables . Dimensions are 196 x 80 x 60 mm (7.7 x 3.1 x 2.4"), with weight 500 g (1.1 lb.).
Dissolved oxygen meters are used in a variety of applications to monitor the amount of oxygen present in water. Applications include sewage and water treatment plants, pollution control, fish farms, and various types of manufacturing.
Hanna Instruments manufactures a wide variety of analytical instrumentation, including pH meters, multi-parameter meters, electrodes, chemical reagents and buffer solutions. Founded in 1978, Hanna is headquartered in Woonsocket, RI, with subsidiaries in 32 countries. Hanna Instruments holds many firsts in the field of analytical instrumentation, including a pH electrode with a built-in temperature sensor, an electronic pocket-sized pH tester, and a replaceable electrode pH pocket tester. To ensure the quality of their products, Hanna is a vertically integrated manufacturer and does not subcontract any part of its manufacturing.
What’s in the Box?
- HI 76407/4 D.O. probe with 4 m (13') cable with 2 spare membranes
- HI 7041S electrolyte solution (30 mL)
- Four 1.5V AA batteries
- Instruction manual
- Carrying case