Harman/Kardon HK3375 2 x 75W Stereo Receiver

by Harman Kardon

Product Details

Product Manual [276kb PDF]

• Item Weight: 29.6 pounds
• Shipping Weight: 30.6 pounds
• ASIN: B00008BNXU
• Amazon Best Sellers Rank: #348,294 in Electronics (See Top 100 in Electronics)

Product Description

From the Manufacturer

Perfect for a main music system, the HK 3375 uses the same discrete high-current, ultrawide-bandwidth amplifier technology found in our AVR Series receivers. Includes multi-component system remote control, 30-preset AM/FM section, phono preamp, subwoofer output, dimmable fluorescent display, pre-out/main-in jacks and even a nine-step, 90-minute sleep timer.

Specifications:

Audio
Stereo mode
Continuous average power (FTC) per channel: 75 Watts per channel, 20 Hz – 20 kHz at <0.07% THD, both channels driven into 8 Ohms; 100 Watts per channel, 20 Hz – 20 kHz at <0.2% THD, both channels driven into 4 Ohms
Input sensitivity/impedance linear (high-level): 200 mV/47 k Ohms
Signal-to-noise ratio (IHF-A): 95 dB
Frequency response at 1 W (+0 dB, –3 dB): 10 Hz – 110 kHz
High instantaneous current capability (HCC): ±42 Amps
Transient intermodulation distortion (TIM): unmeasurable
Rise time: 16 µsec
Slew rate: 40 V/µsec

FM Tuner
Frequency range: 87.5 – 108 MHz
Usable sensitivity: IHF 1.12 µV/13.5 dBf
Signal-to-noise ratio (mono/stereo): 73/72 dB
Distortion (mono/stereo): 0.3%/0.4%
Stereo separation: 40 dB at 1 kHz
Selectivity: ±400 kHz, 65 dB
Image rejection: >80 dB
IF rejection: >100 dB
Tuner output level: 1 kHz, ±100 kHz Dev 500 mV

AM Tuner
Frequency range: 520 – 1710 kHz
Signal-to-noise ratio: >40 dB
Usable sensitivity: loop 500 µV/M
Distortion: 1 kHz, 50% Mod 0.8%
Selectivity: ±10 kHz, >25 dB

General
Power requirement: AC 120 V/60 Hz
Power consumption: 72 Watts idle, 332 Watts maximum (both channels driven)

Dimensions: (H x W x D): 6.1" x 17.4" x 16.3" (156 mm x 442 mm x 415 mm)