| Brand : | Heath/Zenith |
| Part Number : | SL-5597-BZ |
| Assembled Height : | 10.50 inches |
| Assembled Length : | 5.12 inches |
| Assembled Width : | 10 inches |
| Weight : | 2.5 Pounds |
| Item Package Quantity: | 1 |
| Style : | Traditional |
| Color : | Bronze |
| Finish : | Black |
| Number of Lights : | 2 |
| Bulb Details | |
| Type of Bulb : | Halogen Bulbs |
| Wattage : | 75 watts |
Unlike most motion-activated security lights, this one features "pulse count" technology that reduces the number of times that lamps are triggered due to wind and rain. In addition, the "Dual Brite" feature allows you to use it for low-level accent lighting in addition to the full-light effect you get with motion-activation (an included timer allows you to set low-light mode for three hours, six hours, or dusk to dawn-an automatic photocell deactivates the unit in daylight). The unit also includes a selectable timer that lets you set the amount of time the lights stay on after motion stops. Alternatively, it includes a manual override that lets you turn the light on and off at will via an existing indoor switch.
The sensor has a range of up to 70 feet and detects motion in a wide 240-degree range with a maximum 21,000-square-foot detection zone. The detection range is adjustable, too, so you can make sure the floodlights don't go on every time a car drives by.
For the same floodlight in a white finish, see Heath Zenith product #SL-5597-WH-B. Accepts halogen bulbs of up to 200 watts (included).--Josh Dettweiler
What's in the Box
Lamp holders, light control, two halogen bulbs, hardware kit (plastic hanger, mounting bolt, rubber plug, gasket, mounting strap, two wire connectors, six screws)
Product Details
Would you like to update product info or give feedback on images?
|
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
2 of 2 people found the following review helpful:
5.0 out of 5 stars
These are great,
Amazon Verified Purchase(What's this?)
This review is from: Heath Zenith SL-5597-BZ-E 200-Watt Quartz Halogen Motion-Sensing Twin Security Light, Bronze (Tools & Home Improvement)
I am an electrician in Lake Tahoe. These fixtures are great because the lamp is enclosed behind a lens. We have installed over 150 of these and have had no issues except for one that I believe was set off by the neighbor's porch light. We installed 84 of them in one condo complex two years ago. No failures yet. You ahve to read the instructions to properly set up the motion sensor.
4 of 5 people found the following review helpful:
1.0 out of 5 stars
not reliable at all,
This review is from: Heath Zenith SL-5597-BZ-E 200-Watt Quartz Halogen Motion-Sensing Twin Security Light, Bronze (Tools & Home Improvement)
My wife wants these insecurity lights. I put up 5 of them. Over the last 5 years I've had to replace all of them at least once. Sometimes they just flash or go out on their own. If the power goes out then they might or might not come on again correctly. I loathe the awful Heath lights and would take them all down if I could.
2.0 out of 5 stars
4 Years and it is showing its age.,
By Home Improvements (N. Carolina) - See all my reviews
This review is from: Heath Zenith SL-5597-BZ-E 200-Watt Quartz Halogen Motion-Sensing Twin Security Light, Bronze (Tools & Home Improvement)
I installed this product in 2006 to be a primary security motion light above my garage. Intended use was to provide subdued light for the driveway and show a presence if it detected motion. Design was neat, compact and appeared durable with the lights secured in a water tight case. The installation was straight forward and directions were easy to follow. I rented the house in 2007 and in December 2011 returned to find the light not functioning. I purchased 2 replacement bulbs and took them up on the roof for replacement. I found small set screws that held the bulb housing in place. Great idea to keep them in place but I had to make a second trip down the ladder for more tools. The first set screw came out easily enough, allowing me to replace the burned out bulb. The second set screw was stuck causing me to snap the tip of my small screw driver. I ended up removing the entire fixture to work on that set screw rather than lying on the roof hanging over the edge to work. I took the fixture to the garage to spray the set screw and never did get it to budge. While waiting for the oil to loosen the screw I noticed the paint was starting to peel on the unit. I still have yet to remove the screw to replace the second bulb but have considered replacing the entire unit with a different design. The look of the Zenith unit was the best feature and when it was working it worked fine. The difficulty replacing bulbs, the corroded set screw, and peeling paint moved this product from a 5 star down to a 2. If I can get the screw removed and bulb replaced I will continue to use it and hope the brains are still operating correctly. If you do buy this unit new, remove the set screws, and apply some anti-seize grease to the set screw. It might be a good idea to spray some Rustolium to the parts aluminum that are exposed to prevent corrosion. Or look for a better designed/built system. For outdoor use in easily accessible locations, this product, being a bit maintenance intensive, will provide 3-5 years of service.
Share your thoughts with other customers: Create your own review
|
|
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|