Hobart 500408 IronMan 250 30-to-250 Amp Complete Single-Phase MIG Welding Package

by Hobart

Product Description

From the Manufacturer

The IronMan 250 is a powerful welding package that is versatile and easy to use. The IronMan welds 22 gauge up to 1/2-inch material in a single pass. This unit comes complete with a 200 amp gun and built-in running gear/cylinder rack and handles wire spools up to 45 pounds - wire feed speed adjusts from 90 to 750 IPM.

Comes With

• Rugged constant-voltage DC power source
• 10 ft. (3 m) primary input cable with plug
• Durable built-in wire feeder
• .023 and .030/.035 in. quick-change dual groove drive (feed) roll
• 12 ft. (3.7 m), 200 amp MIG welding gun
• 10 ft. (3 m) work cable with clamp
• Regulator/flow gauge
• Extra contact tips
• 5 ft. (1.5 m) gas hose with fittings
• Built-in running gear/cylinder rack
• 10 lb. spool of .035 (0.9 mm) in. solid wire
• Weld, set-up and parts information chart

Features

• Welds 22 gauge up to 1/2 inch material in a single pass
• Excellent aluminum welding with optional Spoolmate™ 3545 spool gun, no module needed for hookup
• Seven-tap voltage control allows for a smooth easy-to-control arc
• Infinite wire feed speed control for precise adjustment of penetration and weld bead shape
• Comes complete with 200 amp gun and built-in running gear/cylinder rack
• Handles wire spools up to 12 in (33 lb) - wire feed speed adjusts from 90 to 750 IPM
• Built-in thermal overload protects the unit
• Reversible drive rolls: two grooves for three wire sizes on one drive roll. Decreases spare parts and changeover time
• Hinged door for easy access to wire drive system for spool and drive roll changes

Product Description

The IronMan 250 is a powerful welding package that is versatile and easy to use. Infinite wire feed speed control from 90 to 750 ipm allows you precise adjustment of penetration and weld bead shape. 7 tap design gives you easy heat or voltage range selection. Excellent short arc performance for easy control over weld puddle. Front panel is sloped for easy access. Volts: 200 / 230, Amps: 250, Duty Cycle: 60% at 200 Amps, 24 Volts DC, Mig Ready: Yes, Wire Feed Speed Control: Yes, 90 - 750 IPM, Weldable Metals: Steel, stainless steel, and aluminum, Weld Thickness (in.): 22-gauge up to 1/2in., Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: No, Welding Wire Diameter (in.): .023 - .035, Power Cord (ft.): 10, Cart: Yes, two rear wheels and two swivel casters, Dimensions L x W x H (in.): 18 7/8 x 36 1/2 x 31 1/4

Product Details

Product Manual [1.17mb PDF]

• Product Dimensions: 36.5 x 19 x 31.2 inches ; 195 pounds
• Shipping Weight: 261 pounds
• Shipping: This item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B00004WHGF
• Item model number: 500408
• Average Customer Review: 2.0 out of 5 stars  See all reviews (1 customer review)
• Amazon Best Sellers Rank: #472,530 in Home Improvement (See Top 100 in Home Improvement)

Customer Reviews

Most Helpful Customer Reviews

0 of 1 people found the following review helpful:

2.0 out of 5 stars rip-off after shipment, September 13, 2009

By 

charles sherman "Spartan warrior" (centerburg, oh United States) - See all my reviews

This review is from: Hobart 500408 IronMan 250 30-to-250 Amp Complete Single-Phase MIG Welding Package (Tools & Home Improvement)

I received a bill for shipment of $100.00 9/11 when it is supposed to be free .The weld machine had been tampered with and I complained to Hobart Company. Bottom line I'll never buy from Amazon again!