Customer Reviews

Incra IRSET12 12-Inch Marking Rule Set

5 star:		(7)
4 star:		(2)
3 star:		(1)
2 star:		(0)
1 star:		(0)

 

 

I first bought the Incra TSIII-32 table saw fence. I became indoctrinated into the Incra system. One that creates unbelievably accurate results with the least amount of effort. When I tell others that my fence-table saw is adjusted so that I can cut any size board, take out a dial caliper and it is accurate to .002", then get mad at me and tell me I'm either wrong or not telling them the truth, but it is true.
I then bought the 6" rule, and it is so accurate, I measure all of my other measuring devices by it. I wound up throwing out my far less than accurate tape measures and rules. Oh a lot of them are accurate through out the rule, but the beginning reference could be off somewhat. What else matters? Some people are not into getting totally accurate measurements. My philosophy is to strive for perfection, and settle for excellence. So onto the rule.
Since it has these tiny holes that you place the tip of a mechanical pencil into, then slide the rule along your workpiece. Thereby insuring a perfect line, exactly the distance from the edge. No holding the pencil along a rule, and sliding it along, making a varied line. If you use these rules, and gently begin your cut a hair over the line, you can tweak the workpiece up to the edge of your blade at exactly the mark line.
I use the 6" so much, that I decided to get the 12" complete set, which includes the edge-corner rule etc. I know that when I need to mark a workpiece greater than 6", I am going to be cursing myself for needing to use a ruler and a try to make the mark at the right spot method.
The thing about the Incramental system, in all of the their equipment, is that it takes less time to make a perfect cut. Some people feel that this kind of accuracy is not essential, but once you get into perfect fitting cuts, your quickly spoiled. Incra is unique. Check out all of their items. This rule set is a nice addition to your arsenal. Highly recommended.

I calibrate measurement tools for a living and it's not very often I'm impressed by tools in this price range. I also almost never give anything 5 stars. These are the exception.

No measuring device is "exact" but, after calibration, I found these to be as accurate as rulers costing 5 times as much. Also, the aluminum bar is amazingly repeatable. I found that removing and replacing the bar caused no degredation in accuracy. So don't be affraid to adjust the bar to suit your application. As long as the ruler is seated against the stop it will have a remarkable accuracy.

The price is the final star in this package. I would expect to pay twice this price to get even one ruler this accurate and useful. But here they give you three. You can't go wrong with these.

I could not be more pleased with these rules. They have a series of very small holes aligned with the usual ruler measure marks. You mark your measurements by using a mechanical pencil (or other thin writing tool) and putting the point into the appropriate hole. Your mark is a neat pinpoint lined up eactly with the ruler mark. The increments of measure are very small, so I have not yet had a situation where I couldn't measure what I needed. The marks are easy to read. The rules work well for drafting or for marking materials. One note: They are made of very thin metal (or composite?), and so are not rigid. I actually like this, but if you prefer a rule with some heft, you might not like this.

I love this tool. It will save you a lot of time and hassle when compared to marking with the standard square or tape measure. With the standard way you have to make sure that your eyes are right over the mark to ensure accurate cuts but this tool takes that variable out of the equation. I will definately buy the 18" set next and I hope to see a long 48" version or if possible a tape measure with the same hole type marking. Hey I can dream can't I.

I just got this along with the protractor and am still playing/learning how to make the most of them but I can't stop smiling (almost giggling) at how easy it makes precisely marking things. I'll probably end up getting the 18" versions as well. A nice feature not mentioned is that it came with a .5mm mechanical pencil, so you don't have to go get one. The very thin material means I'll have to store it carefully but it also means it can be wrapped around pipes, dowels and follow contours with ease which greatly out weighs the risk of damaging them.

Bottom line:
I'm planning to get several sets to give away as gifts to my machinist, fine wood working and model making friends, that's how great they are!

This rule set is terrific. I wish it came with more pencil led. Make sure you purchase .5mm led for it.

The tools are exactly what they say they are - precision measuring devices. They are easy to use and having the complete set is an asset. If you want your drawings and cuts to be as close to exact as possible, then you need this tool.

I would highly recommend this product to anyone looking for accuracy and quality. I was actually surprised at the quality vs. price; and as always Amazon delivered on time without any hassles or delays. Some people claim the Incra precision protractor's are flimsy, but I didn't find this to be true. Make sure you have a 0.5 mm lead pencil though, because anything larger will not fit through the marking slots.

This is one of the best ruler sets I have used it is very accurate and easy to use. The design makes them very accurate and easy to use.

One issue I have had is that they are so accurate (to the 1/64) that I have to wear glasses to see which mark I am using. The ruler is well marked and easy to read but it is still to 1/64 of an inch.

These would have been 5-star, but the metal is so thin (almost paper-thin) that it can be bent easily. And if a tool won't hold up, that's two stars to me. If you can treat them very delicately then this is a great product.