Customer Reviews

Incra TTRACKREG36 36-Inch T-Track Regular

5 star:		(4)
4 star:		(0)
3 star:		(0)
2 star:		(1)
1 star:		(0)

 

 

If this is the only T-Track you've bought you might think it's OK, but I bought some of this and some of the stuff from Peachtree woodworking (all through Amazon). The stuff from Peachtree is WAY better. This stuff the bolts almost fall out of. The 1/4 inch bolt that is supposed to fit is just a sloppy fit. The opening of the slot is large enough for a 5/16 bolt, but the slot for the head is about 1/32 too small to take a 5/16 bolt. The stuff from Peachtree is very tight, the 1/4 bolts slide in nicely but there is no slop or fear that you will pull the bolt out if you tighten it up. It's all about the same price so if you don't care about the fancy anodized gold color you will be much happier with the silver stuff.

This is good t-track that accommodates hex bolts you can purchase at your local hardware store.

Most 3/4" wide T-Track is 3/8" deep, so it usually works well in 3/4" thick wood. This Incra T-Track is 1/2" deep and I'd want to do some testing with the specific application before I would use it in 3/4" stock, but it definitely works great in thicker wood. What you gain with the extra depth is the ability to use heavier mounting screws, which makes for sturdy installation. It comes with "#8 wood screws" (they look like round head #8 sheet metal screws to me) while the 3/8" deep T-Track requires #6 or smaller flat head screws. The ability to take 1/4" hex bolts and nuts makes it quite versatile. I'll certainly be buying more Incra T-Track for other projects.

I made a DIY fence for my table saw using MDF. I attached this to the top so I can use a featherboard. Works great. Came with the mounting screws.

bought 2 of these to use on a miter saw stand. they work great. Mounting screws include i also bought the incra knobs. The project turned out well