Does your entertainment system have wooden doors or would you like to mount your components in a closet?
Put all of your AV gear in a closet or in a chest, or even in another room, totally out of view and control it with your IR remote controls.
Receive Frequency Range 34 KHZ to 60KHZ
Transmit Frequencies 38 KHZ & 56KHZ
Receive Range 8 Meter
Emitter Range 5-10CM
Power 12VDC,30mA MAX
Cord Length (IR Receiver) 1.5 Meter (IR Emitters) 3 Meter
Connector Type 3.5mm mini plug
How to Use:
Note: Careful consideration must be taken when placing the IR Receiver near a Plasma Display!
Plasma Displays emit IR frequencies during use and may cause interference.
Put the IR emitter as far as possible from the plasma display screen.
The Connected Remote Control Repeater is shown in the picture below:
Take the Mini IR Receiver (up to three) and connect it to the IR Receiver input jacks labeled 1-3 on the IR Connecting Block.
Connect the emitters (up to six) to the emitter jacks labeled 1-6 on the IR Connecting Block.
Place the emitters on the source equipment.
Connect the 12VDC/ 5V USB Power Supply to the power jack on the IR Connecting Block and plug the Power Supply in the wall outlet. The LED will illuminate with a red light letting you know power is connected
When the LED is green, it means that the power has been connected successfully .When an IR signal is received, the IR confirmation red LED will flash.