This is an IntelliPeak AC/DC Pulse Charger for Charging/Discharging / Nickel Cadmium (NiCd) and Nickel Metal Hydride (NiMH) Battery Packs. / / Note: Do Not Discharge Battery Cells smaller than Sub-C Size / ("Sub-C" is one size smaller than a "C" size). / / *** Five-Year Warranty *** / / FEATURES: Peak charges Nickel-Cadmium batteries using specialized peak charging / technology as well as Nickel-Metal Hydride batteries, plus / Discharging and Cycling features not commonly found in other / chargers. / "Negative Delta V" Peak Detection for NiCds and NiMHs / Built-in Artificial Intelligence to eliminate false peaks / Auto-identifies the quantity of cells being charged / Computerized control, 8-bit 4MHz CPU with 8K ROM, 1K RAM, / 1-channel 16-bit analog-to-digital converter. / High efficiency P-Channel MOSFET drive transistors / 11-15V DC input / Built-in AC Power Supply / Output: 4-7 cells on DC, 4-8 cells on AC / Adjustable fast Charge current of .5-4A AC, .5-6.5A DC / (Note: 3A maximum Charge rate recommended with NiMH packs.) / Pulsed fast Charge, with 8-bit pulse width modulated current control / output. / 100mA TRICKLE Charge / 1A fixed Discharge rate. Fixed 2.60V Discharge cutoff voltage- / . Not designed for Discharging A or AA size (and / smaller) cells . / Cycle functions: Select a single Discharge/Charge cycle for periodic / pack conditioning, or continuous "auto-repeat" cycles for reviving / batteries that have developed a memory, or breaking in a new pack. / Four multi-function, high intensity LED indicators. Status light / glows during charge, flashes when nearing peak. / Audible mode select tone signals for easy set-up / Reverse polarity and fused overload protection / Designed to charge sub-C battery packs. / / INCLUDES: One IntelliPeak AC/DC Pulse Charger w/5' AC Power Cord / One Standard Battery Connector with wire lead (Kyosho-type) / One DC power cord with alligator clips / One Instruction Sheet / One DuraTrax Decal Sheet / / RE...