Invicta

Invicta Watch Sizing Tool

• Tool used to remove pins which allows for bracelet sizing
• Solid yellow plastic with Invicta logo near handle
• Measures 4.5 in. long x 1.5 in. high x 2 in. wide

Product Description

Amazon.com Product Description

The Invicta Watch Sizing tool is the perfect accessory for any watch and non-watch enthusiasts alike. This bright yellow toolkit allows the sizing of most bracelets held together by pins, and or sleeves. Measuring 4.5 inches long, 1.5 inches high, and 2 inches wide, this small tool will save trips to the jewelry store. Simply lay your your band, or bracelet across the link remover's tray, adjust for exact height, and then rotate the handle. Remember to follow the exact instructions/directions from the manufacturer before sizing your watch.

Product Description

The Invicta Watch Sizing tool is the perfect accessory for any watch and non-watch enthusiasts alike. This bright yellow toolkit allows the sizing of most bracelets held together by pins, and or sleeves. Measuring 4.5 inches long, 1.5 inches high, and 2 inches wide, this small tool will save trips to the jewelry store. Simply lay your your band, or bracelet across the link remover's tray, adjust for exact height, and then rotate the handle. Remember to follow the exact instructions/directions from the manufacturer before sizing your watch.

See all Product Description

Product Details

For additional assistance in setting the time or adjusting your watch, please download the Instruction Manual [425kb PDF]

• Shipping Weight: 1.6 ounces (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• ASIN: B002FQKARA
• Item model number: INVICTA-IT003
• Average Customer Review: 3.3 out of 5 stars  See all reviews (143 customer reviews)
• Amazon Best Sellers Rank:
  • #15 in Watches > Accessories > Repair Tools & Kits

Customer Reviews

Most Helpful Customer Reviews

184 of 185 people found the following review helpful:

5.0 out of 5 stars It works!, October 22, 2009

By 

K. Seaver (Boise, ID) - See all my reviews

Amazon Verified Purchase

This review is from: Invicta Watch Sizing Tool (Watch)

There is another "Invicta Watch Sizing Tool" on Amazon with many more reviews. The main point from half of those reviews is that it is easy to break this tool. The only difference I see from that tool and this one is that this one is yellow.

There are no instructions included with this product. With a little research online, in 5 minutes I removed 2 links from my new watch and I am wearing the watch right now. I am going to give you the valuable piece of information that I found online.

When you look at the pins in the links of the watch's bracelet, on one side there appears to be a split in the pin, as if you were going to use a small screwdriver on it. The other end of the pin is solid. This is the key to not bending or breaking the pin on this tool.

Line the tool's pin up with the solid end of the pin in the bracelet, making sure it is in the hole, and slowly turn the knob on the tool. It will push it out enough so you can grab the pin with tweezers of pliers and finish pulling it out.

When you remove the links and put the watch's bracelet back together, you can by hand push the pins back into the links. They will not go all the way in, so you can use this tool to push it all the way in.

12 of 13 people found the following review helpful:

5.0 out of 5 stars Needs instructions, but works great, October 23, 2010

By 

Rene L. Trowbridge "Sleepe64" (Confussion, CA) - See all my reviews
(REAL NAME)   

This review is from: Invicta Watch Sizing Tool (Watch)

I bought this because I have several Invictas. Works great with a little reasoning, and patience. The friction pin wristbands are marked with an arrow as to which way the pins are pressed in, look on the inside of the links. Make sure your not pressing the wrong way, there is a taper to these. Second try to go slow till you're sure the pin tool is pressing the pin and not the link It does not take a lot of force to pop the pin once the tool is set properly. If you force it the tool will break. I have sized 5 different watches now and not one problem at all. When you're going to reinstall a friction pin again make sure it's going in the correct direction, and press the pin all the way in on a flat hard surface to seat it. This is just one of those tools that makes a job easier. Why pay a jeweler or go poking pins or whatever else around your nice NON marred band when there's a proper tool for the job?

25 of 31 people found the following review helpful:

1.0 out of 5 stars Cheap, November 18, 2009

By 

JCR (St. Louis) - See all my reviews

Amazon Verified Purchase

This review is from: Invicta Watch Sizing Tool (Watch)

I got this tool as a freebie for buying an Invicta watch. Great watch, but the tool is terrible. No instructions and if you don't get the pin straight on the hole and then turn the handle the pin bends. I used it on two links and when trying to remove a third link the pin on the tool bent and broke, so I had to go to the jeweler. Luckily it was free or I would have been more upset. I would not recommend buying one at all.