Qty:1
JET J-41002 2-Inch by 42-... has been added to your Cart
Include

2-Year Power & Hand Tools Extended Protection Plan

from Asurion, LLC

  • Delivered by e-mail, register and file claims online or by phone
  • Coverage includes free repairs or replacement after manufacturer's warranty expires, with no deductibles
  • Covers hardware, electrical and mechanical failures
  • Coverage includes free shipping
  • Fully transferable with gifts, cancel anytime, full refund in the first 30 days

1-Year Power & Hand Tools Extended Protection Plan

from Asurion, LLC

  • Delivered by e-mail, register and file claims online or by phone
  • Coverage includes free repairs or replacement after manufacturer's warranty expires, with no deductibles
  • Covers hardware, electrical and mechanical failures
  • Coverage includes free shipping
  • Fully transferable with gifts, cancel anytime, full refund in the first 30 days

Other Sellers on Amazon
Add to Cart
$439.00
+ Free Shipping
Sold by: CPO Outlets
Have one to sell? Sell on Amazon

JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander

by Jet
4.2 out of 5 stars 46 customer reviews
| 9 answered questions

List Price: $525.00
Price: $429.99 & FREE Shipping. Details
You Save: $95.01 (18%)
Item is eligible for 6 Month Special Financing with the Amazon.com Store Card. Apply now
In Stock.
Ships from and sold by Amazon.com.
  • Enter your model number above to make sure this fits.
  • Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
  • Hinged idler wheel cover, tilting table
  • Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
  • Allows an operator to get into small openings, plus handle odd shapes and angles
  • Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
See more product details
2 new from $429.99
This item’s packaging will indicate what is inside and cannot be hidden.
$429.99 & FREE Shipping. Details In Stock. Ships from and sold by Amazon.com.

Frequently Bought Together

  • JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
  • +
  • 2 Inch X 42 Inch 120 Grit Cloth Sanding Edge Narrow Belts - 10 Pack
  • +
  • 2 Inch X 42 Inch 80 Grit Cloth Sanding Edge Narrow Belts - 10 Pack
Total price: $469.81
Buy the selected items together


Product Description

Product Description

Allows for sanding, grinding or finishing of outside curves or odd shaped workpieces on the belt. Deluxe miter gauge that turns and locks for common angles 45° both left and right.

Amazon.com

B003J69ET0-577004-tilt
45-degree tilt (view larger).

Precision Built and Designed to Last

Every shop needs a combination sander capable of delivering premium finishes every time. JET's 2 x 42-inch belt and disc sander (model J-41002 / 577004) is a powerful and versatile machine, performing the work of a jig saw, coping saw or hand file removing material and creating a superior finish at the same time, enabling the operator to get into small openings plus handle odd shapes and angles. It also features a heavy-duty base, cast construction, and cast iron tilting table.

The JET Advantage

Reliable, quality engineering and manufacturing goes into each and every JET machine. JET machines are built and tested to tight tolerance standards to insure consistent quality and precision operations. Professional user manuals help you put JET saws to work faster, safer and more efficiently. And because JET backs all its machines with the industry's top warranty, you can have confidence that your JET machines will continue providing superior cuts every time you flip the switch. JET also offers over 750 authorized service centers across the USA, so you can be assured a qualified local technician can help troubleshoot, order parts, and repair your equipment should a problem arise.

B003J69ET0-577004-miter
Miter gauge detail (view larger).

Red Assurance 2-Year Warranty

If your JET tool needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.

Specifications

Disc speed3,450 RPM
Belt size2 x 42 inches
Belt speed3,100 SFPM
Disc table size10-3/4 x 7-1/2 inches
Disc table tilt45 degrees
Motor3/4 HP, 115-volt, 1 phase
Overall dimensions20-1/2 x 22-3/4 x 20 inches
Weight60 pounds

About JET

JET began as a small dealer of manual chain hoists and trolleys, sold from a single hardware store in Tacoma, Washington. Today, JET has an expert team of engineers both in the USA and overseas and a world-class supply chain ensuring prompt delivery of quality products. JET still carries the same message of quality product, with the best features and benefits in it's product class; all the while providing excellent service.

jet logo

J-41002 / 577004

At a Glance
  • Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
  • Allows for sanding, grinding or finishing of outside, curves or odd shaped work pieces on the belt
  • Hinged idler wheel cover
  • Abrasive belt unit does the work of a jig saw, coping saw or hand file
Standard Equipment
  • Miter gauge
  • Cast iron tilting table
  • Cast construction
  • Heavy-duty steel base and rubber feet
  • Removable platen
  • Dust deflector and chute

Product Information

Technical Details

Part Number 577004
Item Weight 60 pounds
Product Dimensions 16 x 16.7 x 23.1 inches
Item model number J-41002
Power Source corded-electric
Item Package Quantity 1
Included Components bare-tool
Warranty Description 2 Year

Additional Information

ASIN B003J69ET0
Customer Reviews
4.2 out of 5 stars 46 customer reviews

4.2 out of 5 stars
Best Sellers Rank #55,091 in Home Improvements (See top 100)
#7 in Home Improvement > Power & Hand Tools > Power Tools > Sanders > Combination Disc & Belt Sanders
Shipping Weight 69.4 pounds (View shipping rates and policies)
Domestic Shipping This item is also available for shipping to select countries outside the U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Date First Available November 7, 2009

Warranty & Support

Manufacturer’s warranty can be requested from customer service. Click here to make a request to customer service.

Customer Reviews

Top Customer Reviews

Verified Purchase
This is my third 2" belt sander, and they have all been junk. I saw this one, and I thought it would be good because the price was higher than I have paid before. When it came, and I saw the picture, it was just like my last one, but was I amaized when I unpacked it and started to assemble it. Wonderful! Everything I hated was now different and excellent.
This sander is super top quality. I think my old sander was made to fit some low price. I could not be happier.
OldHenry
Comment 18 of 18 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
This is a powerful machine, not a toy. It will grind what you like without breaking a sweat. It does not take up the space that a floor sander would, although it will need to sit on your bench or table. It can do many tasks that a larger sander would. It can also be used with 1 inch belts. I wish I had bought it sooner.
That being said, there are some drawbacks. The belt table was poorly machined, requiring significant shimming to be level. Ditto the belt's back platen. I was able to get them right, but it took some work.
Another potential problem is that the capacitor-start induction motor cannot (by its nature) be speed controlled even with a variable-frequency drive. (Its smaller 1 inch brother has the same type of motor.) For sharpening knives, this is an issue. And the dust ports, at 1 1/2 inches, are nonstandard.
But for general purpose sanding and grinding, it is the cat's meow! (once adjusted properly.)
Comment 14 of 14 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
This jet belt sander has good power and is stable when using it.I use if for sanding and grinding metal.This is not the fastest machine for shaping parts,but compared to the alternative of 2 thousand for a bur king it's a good value.One bad part is the 2x42 belt size is not very common so they are hard to find atleast locally.This sander has good weight and does not vibate when under load.Plus does not take up to much bench space.I purchased this for Amazon and they shipped for free I received it in four days.
Comment 11 of 13 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
First, the bad. As with other reviewers, the disc table likes to repoition itself when tightening, but I found that tightening both sides in small increments helped. It is also true that the platten wasn't perfect out of the box, it was fairly easily adjusted for me (good luck?). The thing that is the biggest issue for me is that if you change belts frequently the right ear of the table necessitates completely removing the table as well as the dust cover on the right. As this is a big issue for me I will be lopping that ear off in a van Gogh tribute to facilitate easier belt removal and making a top plate with an ear for when I need support on that side. All of the faults except the ear on the table are pretty minor, especially for this price point, so -1 star.

The good parts though are nice. It is powerful enough, the tracking and belt tensioning are very easy and stable once set. All of the screws and handles went in straight and easily. The tables are a nice, heavy, cast iron and the entire unit is heavy enough to be stable. The only plastic bits are the 2 dust port covers, handles for knobs, and power switch and the only piece that feels a little lightweight is the non-precision miter gauge, which is OK for my needs. Overall, very happy with it, especially compared to similar items at a lower price point that just feel like crap.
Comment 7 of 8 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
first off before I get into this specific product, know the time and energy I spent looking into all of the belt sanders avauilable, the companies and if they are a legit company, if they will stand behind the product etc.... How reliable the products are and so on.....

If you are in the market for a 2" belt sander, you can buy one of those cheap pos "Harbor Freight" brands like Chicago something, it's on amazon and all the other CHINA made crap. If china made a decent product i wouldn't care, but they don't. The pieces inside are plastic.what they say is cast iron is stamped sheet metal. as the sayiong goes, "YOU GET WHAT YOU PAY FOR"

Now as for this incredible buy. Firest off, I did allot of research on Jet, the company. You can do the same, They give a 2 year factory warranty, have repair centers all over the country and after the warranty is over you are not on your own. If it goes down, you need a part you can contact them they will firect you to the nearest service center and you can still have it serviced or get parts and service it yourself if you are that type. Point being, there are parts available for these! WhY? JET is a legit manufacture and company. Even Craftsman who had a good reputation for quality is a joke these days when I looked at their belt sanders. (all plastic.)

Packaging was perfect, easy to open and get out (although this thing is a real machine and weighs a ton cause it's made of metal not plastic.) Assembly is a breeze, took 20 minutes. Everything fit perfect, was level, didn't have to do any adjustments or modifications.

This belt sander has POWER, does not bog down no matter what. I am so so happy with it. I have owned machines 2 and 3 times it's price and this one in my opinion is as good if not better.
Read more ›
1 Comment 9 of 11 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
Purchased a Jet 2 x 42 belt grinder to help with making a few bits this winter. I ordered it on Friday; Dec 28, 2012. It arrived on Saturday; Dec 29, 2012 with one day shipping. No problems with assembly; had it finished and the belt tracking properly in about 45 minutes. It is everything I hoped it would be. I use it to sand down 3/8" to 1/2" steel rounds in old spring steel or 41-40 tool steel. Motor has plenty of power for what I am doing. I would recommend it to anyone needing a smaller belt grinder/sander. MarkN
Comment 3 of 3 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Most Recent Customer Reviews

Set up an Amazon Giveaway

Amazon Giveaway allows you to run promotional giveaways in order to create buzz, reward your audience, and attract new followers and customers. Learn more
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
This item: JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
Price: $429.99
Ships from and sold by Amazon.com

Want to discover more products? Check out these pages to see more: wheels for belt grinders, bench grinder/belt sander, sand belt machine, disc sander belt/disc