JBL AV1 7.1 Channel Surround Processor

by JBL

Product Details

• Shipping Weight: 25 pounds
• ASIN: B001F3A0ZQ
• Item model number: AV1
• Amazon Best Sellers Rank: #326,742 in Electronics (See Top 100 in Electronics)
• Date first available at Amazon.com: August 30, 2008

Product Description

First MSRP $5,000.00 Analog Audio Inputs Eight stereo (RCA) or five stereo and one 5.1-channel or two stereo and two 5.1-channel connectors Digital Audio Inputs Four S/P-DIF coaxial (RCA) and four S/P-DIF optical (TosLink) connectors; coaxial and optical input connectors conform to IEC-958, S/P-DIF standards; accepts 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates; accepts 16-24 bits PCM audio, Dolby Digital, DTS and DTS-ES discrete data formats Audio Output(s) Eight unbalanced (RCA) connectors for front L/R, center, subwoofer, side L/R and rear L/R Audio Processing Section A/D Conversion 24-Bit, 96kHz, dual-bit architecture D/A Conversion 24-Bit, 44.1kHz to 192kHz, multi-bit architecture Frequency Response 10Hz to 20kHz, +0.05dB/-0.1dB, -0.5dB at 40kHz, reference 1kHz THD + Noise Below 0.008% at 1kHz, maximum output level Dynamic Range 108dB minimum, 22kHz bandwidth S/N Ratio 108dB minimum, 22kHz bandwidth Input Sensitivity 200mV RMS (2V RMS for maximum output level) at 0dB input gain Output Level 150mV RMS typical, 6Vrms maximum; maximum value with full-scale input signal and volume at +12dB Video Input & Output Connectors Video Inputs Five composite (RCA), five S-video and three component video (RCA) Video Outputs One composite (RCA), one S-video and one component (RCA) Composite & S-video Performance Compatibility NTSC, PAL and SECAM Impedance 75 Ohms Bandwidth >25MHz Component Video Performance Compatibility 3-Channel (Y/Pr/Pb), format-independent Impedance 75 Ohms Insertion Loss <3dB Bandwidth >150MHz General Trigger Outputs One power on/off and one programmable connector on 5-pin DIN RS-232 Serial Input/Output Two 9-pin D-sub connectors Power Requirements 90 - 250 VAC, 50Hz - 60Hz, 60W (universal line input), detachable power cord Rack Mounting Optional brackets are available for installation in a standard 19" equipment rack (two rack units required for AV1). Dimensions (H x W x D) 3-13/16" x 17-5/16" x 14-7/8" Weight 17 lb/7.7kg