Customer Reviews

Universal Learning Bypass Module

5 star:		(10)
4 star:		(3)
3 star:		(0)
2 star:		(2)
1 star:		(6)

 

 

When I opened the module, the plastic housing clips that hold the device together broke off. It's made of cheap/flimsy plastic. After opening the device I noticed that the internal wiring was disconnected from the circuitry panel. I've tried contacting the manufactorer (JBS Tech) 3 times with no response. I have since ordered a similar product except the Bulldog Security brand instead of JBS Tech knock-off brand.

I have installed several remote start systems, but this was the first with a security bypass. It was much easier to do than I had imagined.

I installed this product quickly, easily and it worked just like it was suppose to. Bulldog has some great products and this is definitely one of them. This item was a must for the installation I performed. I just followed the directions included with this item and it was very easy to work with. I feel the price is definitely a bargain considering the purpose of this item.

This module needs to have an RFID key inside the module to work. They should make that clear when they sell this module.

I found my module easy to install while I was in the process of installing my BullDog starter. It worked the first time I had it attached to the system. Car wouldn't start without it, so can't help but recommend it. I used it for a key with a chip (GM Product).

would just like to say I was very pleased with the ease of the install,and only had 1 question with the learning procedure.called there help line and they answered my questions in minutes.Was very very pleased both with the product and there support staff.

I purchased this to install in an 02 Audi A6. The Audi key fob is large and will not fit in this unit. You'll need to buy a smaller valet key from Audi to make this work. I suspect VW's are the same.

Note that the transponder receiver is on very stiff and brittle wires which break easily - when I decided to use this on my Subaru instead, they broke, and I had to buy another unit.

Next time I'm buying something locally and having it installed.

Took a whole 5 mins to add this to the remote starter very simple. As for leaving a key in the car. sand off the blade edge so it no longer works. The part you want is the chip in the rubber or plastic part of your key

(2000 ford excursion) showed up in excelent shape used a coded key as required
red wire to constant hot forget orange wire to ground unless you want red light on all the time does not effect oper.
blue wire to ground put loop ant.behind plastic shroud on key switch can be done by removing key switch
tested several times woked with doors locked or unlocked did not affect range or operation of remote 550R-LCD

Not too difficult to install. You will need an extra copy of the factory ignition key that will stay inside this device at all times.

Follow the directions carefully. There are 2 or 3 possibilities on how one specific area needs to be wired. Don't get frustrated if the the first way you try it doesn't work. Mine worked with the 2nd arrangement.