JET 708480K JPS-30: 10-Inch ProShop Tablesaw 1-3/4-Horsepower 30-Inch Rip Fence with Steel Wings

by Jet

Product Description

From the Manufacturer

The new JET� ProShop Tablesaw features the details you've come to expect from a high end cabinet saw; in the compact design of a contractor-style saw. What ever your current or future shop needs, the ProShop 10" Tablesaw offers you the choice of a saw that will work for you for decades to come.

Product Description

Includes JPS-10XL30SW, 1-3/4 HP 10-in Single Phase Left Tilt ProShop Table Saw w/ 30-in ProShop Fence - 708480K, 30-in ProShop Fence System, Steel Extension Wings, 10-in Blade

Product Details

• Item Weight: 285 pounds
• Shipping Weight: 285 pounds (View shipping rates and policies)
• Shipping: This item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B000WO1HU6
• Item model number: JPS-10XL30SW
• Average Customer Review: 4.0 out of 5 stars  See all reviews (8 customer reviews)
• Amazon Best Sellers Rank: #141,476 in Home Improvement (See Top 100 in Home Improvement)
  • #57 in Home Improvement > Power & Hand Tools > Power Tools > Saws > Table Saws

Customer Reviews

Most Helpful Customer Reviews

17 of 17 people found the following review helpful:

4.0 out of 5 stars Good value for the money, February 11, 2008

By 

J. Russ "duffer" (Mt. Pleasant, SC) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: JET 708480K JPS-30: 10-Inch ProShop Tablesaw 1-3/4-Horsepower 30-Inch Rip Fence with Steel Wings (Tools & Home Improvement)

This is a quality hybrid saw. The setup is straight forward and relatively simple although it does take two people because of the weight. Once setup, the saw required just a little adjustment for proper parallelism and accuracy of the blade and the fence.

Cuts are smooth and the saw has plenty of power for the home woodworker.

21 of 22 people found the following review helpful:

2.0 out of 5 stars Broken start capacitor, September 19, 2010

By 

La Sierra - See all my reviews

This review is from: JET 708480K JPS-30: 10-Inch ProShop Tablesaw 1-3/4-Horsepower 30-Inch Rip Fence with Steel Wings (Tools & Home Improvement)

The saw arrived undamaged from shipping. Set up took about 3 hours by myself and was simple enough. The steel wings are a little flimsy and difficult to align perfectly with the cast iron table. Started the saw up on a 110V 20amp dedicated circuit which is above the required level for the motor. The blade would spin about one inch and the motor would hum. Calling technical service was easy, but I got the runaround from three different people.

1st guy: Told me the saw needed 40 amps which is wrong since it says 15 amps in the manual and on the Jet website. My hopes weren't high at this point that anything else this guy told me was going to be accurate. He had me take off fan to look at the centrifugal switch. I did this and called back 5 minutes later...
2nd guy: I got the fan off and could not see the centrifugal switch. The technical support guy told me that there was a plate to remove to access this switch. There was no plate. He argued with me that there was a plate to remove. He got testy. Finally he put me on hold and came back 5 minutes later and said that I was right and that the newer models did not have the plate he so urgently wanted me to remove. He told me the problem was definitely the centrifugal switch even though I was not able to actually access it to check it. He gave me the phone number of a service guy 40 miles away and told me to remove the motor and drive, make an appointment with the service guy and get the motor serviced. I said this wasn't acceptable to me and that they needed to send out a service guy to fix my brand new defective saw which never worked. He told me that this could not be done so I tried getting another tech guy.
3rd guy: Told me the saw had a bad starter capacitor and that he would send me one in the mail.

Now I am waiting for this part to arrive. When it arrives I will finish the review. I think the saw will probably work well once it is going. Basically I have a problem with the attitude of several of the tech guys. They seemed impatient, testy, and didn't seem to know what they were talking about.

20 of 21 people found the following review helpful:

4.0 out of 5 stars Great Saw but still needs work, February 27, 2008

By 

Behrooz Kousari "Behrooz" (Phoenix, AZ) - See all my reviews

This review is from: JET 708480K JPS-30: 10-Inch ProShop Tablesaw 1-3/4-Horsepower 30-Inch Rip Fence with Steel Wings (Tools & Home Improvement)

woodworking is what gets my mind off large complex computer systems. I have gone thru 3 saws. I could not have a bigger more professional saw becasue of space limitation so I settled for this after careful reviews.

These ehancement will make it a great saw for its price.

1 - The Dust collection is poor.
2 - The dust and service door does not have hinge. 4 screws must beremoved to get access to inside of the saw
3 - Legs Have hole in them which will reduce the dust collection effectiveness.
4 - The rubber shoes should be self leveling.
5 - No riving knife. too bad because jet will not have solution for current customers. By next year they have to have one. I am considering MicroJig splitter
6- The power cord could be a bit longer
7 - the insert should have been standard like other jet saws. it is unusual thickness.
8- The miter gauge is too cheap. I am going to replace it with a kreg miter gauge.

Everything else on this saw is first class. All the essentials are among the best. The motor, fence, cast iron top, rails. Hope jet will address these short comings.I will recommend this saw
to anyone. Don't waste money on other saws. you will not find anything better out there.