2014 Electronics Holiday Gift Guide
Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

Image Unavailable

Image not available for
Color:
  • JMT BGC 2.0 Brushless Camera Gimbal AIO Controller Board Russia Firmware w/ Sensor FPV
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      

JMT BGC 2.0 Brushless Camera Gimbal AIO Controller Board Russia Firmware w/ Sensor FPV

by JMT

Currently unavailable.
We don't know when or if this item will be back in stock.
  • BGC 2.0 Brushless Camera Gimbal AIO Controller Board Russia Firmware w/ Sensor FPV
  • This controller is for use with brushless direct drive (BLDC) motors. Included sensor unit with gyro and accelerometer is mounted on the camera platform; the controller unit receives data from IMU to define camera inclination angles. PID-controller calculates the amount of compensation and sends command to the power unit, which controls the current in the windings and thus the direction of the vector of magnetic field in the stator. Magnetic field moves the rotor to the right position.

Product Details


Product Description

BGC2.0 Brushless Camera Gimbal AIO Controller board Russia firmware version w/ Sensor

we can flash the Martinez Germany firmware version for you too,please note us when you order it.
This controller is for use with brushless direct drive (BLDC) motors. Included sensor unit with gyro and accelerometer is mounted on the camera platform; the controller unit receives data from IMU to define camera inclination angles. PID-controller calculates the amount of compensation and sends command to the power unit, which controls the current in the windings and thus the direction of the vector of magnetic field in the stator. Magnetic field moves the rotor to the right position.
Specifications:
USB connector (no FTDI needed)
Stabilized VBUS (USB port)
Pin layout optimized GND, A1 and A2 GND, multi-port, 5V
L6234 brushless motor driver
2 outputs for brushless motors
4 receiver inputs
6 analog inputs
Serial port available
Power LED (blue)
Small LEDs on the USB
Dimensions 50 mm x 50 mm
Standard MK style mounting holes 45 mm x 45 mm
2 instead of 4 glass diodes SOT23
5V better stabilized
Shifter lever on the I2C Bus (3.3V to 5V)
Pull reduced (for better edges)
Bootloader and firmware of Atmega328 already flashed with the last version

code.google.com/p/brushless-gimbal/downloads/detail?
code.google.com/p/brushless-gimbal/downloads/list
ftdichip.com/Drivers/VCP.htm
code.google.com/p/brushless-gimbal/

Customer Reviews

There are no customer reviews yet.
5 star
4 star
3 star
2 star
1 star
Share your thoughts with other customers