JVCC HZ-8 Hazard Warning Tape is a conformable soft PVC vinyl tape used for indoor aisle, exit, floor, restricted and hazardous barrier area marking. It is also used for striping. Helps to comply with OSHA requirements per paragraph 1910.144 of the Federal Register. JVCC HZ-8 striped hazard warning tape features a self-extinguishing synthetic rubber adhesive and it will not corrode copper, brass, steel, or aluminum. Color choices include: Black/yellow which is typically used for physical hazard/caution. Red/white for fire equipment/first aid. Black/white for traffic/housekeeping. Green/white for decorative identification. Magenta/yellow for radiation hazard. The diagonal stripes on the tape are approximately 2-3/4" long (measured at the edge of the roll). Widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 72mm x 16.5m. This tape is typically cut to width from log rolls so most sizes ship on a plain white core.