Jet 70411 Parallel Clamp Cabinet Door Set

by Jet

Product Description

Amazon.com Product Description

The Jet 70411 Parallel Clamp Set has 90-degree clamping capabilities and is designed to clamp up to 1,000 pounds of pressure. The included framing blocks help you quickly create the perfect square, while the bench dogs maximize clamp stability. This clamp set comes with two 24-Inch Parallel Clamps, two 40-Inch Parallel Clamps, a Framing Block Kit, and a Bench Dog Set.

The Parallel Clamp Set At a Glance: Features 90-degree clamping capabilities Clamps provide up to 1,000 pounds of pressure Framing blocks create a perfect square Bench dogs make clamping easy and fast Slide-Glide trigger locks the jaw into place

Clamp features SumoGrip handles for comfort, bench dogs for stability, and I-beam construction for durability. View larger.

A Precision-Rule Measurement System along the rails helps provide consistently accurate results. View larger.

Jaw and Throat Deftly Handle Your Toughest Projects
Including a deeper-than-standard throat and wide jaws, this versatile parallel clamp set is designed to handle your toughest woodworking projects. The Precision-Rule Measurement System featured along the rails offers you consistent setups and an exact reading on your openings--a unique feature other clamps fail to provide.

What's more, the moveable, reversible jaws can be dual-purposed as spreaders, and the Slide-Glide trigger locks the jaws into place, allowing for smooth movement. Also, the moveable rail stand adds convenience and accuracy to both clamping and spreading operations.

Ergonomically Designed for Easy Operation
This Jet Parallel Clamp Set features ergonomic construction that's designed to work for you--not the other way around. The clamps' soft SumoGrip handles are comfortable to hold, and they help you get maximum torque. The clamps do not take much strength to manipulate, yet they can clamp up to 1,000 pounds of pressure. In addition, each Acme-threaded handle easily turns while applying continuous pressure.

Built for Durability and Convenience
This clamping kit is built to see you through all of your projects. Featuring a durable aluminum design, superior I-beam construction, and a fully-plated rigid backbone to prevent corrosion, the clamps are built for long-lasting use. Additionally, a non-marring composite resin covers the jaw faces to prevent wear and tear.

For ease of use, four mounting holes guarantee a permanent framing kit setup. Cross Doc framing blocks help you securely glue rectangular frames at four stable points, creating a perfect square. To top it off, the two-inch Bench Dogs help maximize clamp stability at any point, making repetitive clamping easy and fast.

What's in the Box
Two 24-inch Parallel Clamps, two 40-inch Parallel Clamps, Framing Block Kit, and Bench Dog Set.

Product Description

Upgrade your workbench clamps and get the largest clamping surface in the industry! Jaw depth is 4-1/8". Features non-marring composite resin jaw faces that provide even clamping pressure. Jaws also reverse as a spreader.


Ergonomic handle has soft grip for added comfort and increased torque. With Slide-Glide trigger for fast, easy adjustments and rule measurement system for a consistent setup. Moveable end stop helps preset clamping capacity.


The parallel clamp kit offered here includes two 24" parallel clamps, two 40" parallel clamps and one 4-pack of framing blocks, which are used to arrange 4 clamps in rectangular configuration.

See all Product Description

Product Details

• Shipping Weight: 35.2 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B000F79022
• Item model number: 70411
• Average Customer Review: 4.7 out of 5 stars  See all reviews (44 customer reviews)
• Amazon Best Sellers Rank: #11,582 in Home Improvement (See Top 100 in Home Improvement)
  • #18 in Home Improvement > Power & Hand Tools > Hand Tools > Clamps > Bar & Pipe Clamps

Customer Reviews

Most Helpful Customer Reviews

37 of 39 people found the following review helpful:

5.0 out of 5 stars Jet stepped up to the plate, late in the game...., June 22, 2006

By 

funbear - See all my reviews
(VINE VOICE)   

Amazon Verified Purchase

This review is from: Jet 70411 Parallel Clamp Cabinet Door Set (Tools & Home Improvement)

These clamps are rock solid, and heavy. They seem drop proof so far, as the red seems a mix of plastic and rubber. Clamping pressure is easy on the hands as they designed a wide diam. size hex grip, much easier to twist then classic round grips. The dog system and framing blocks are very well made. They are the ultimate "one size fits all" clamping system. The dogs go into the the bottom of the clamps, as well as a movable dog insert on the back of the clamp, to allow perfect positioning on any dog hole pattern. Very well thought out, high build quality...I plan to buy lots more...

update 9/13/06

AFter using these clamps for some time a few more thoughts. I have recently been testing the clamping pressure of all my make clamps, and by far, the jet clamps are the best of all the parallel clamps I own... I have most of them. The big handle with hex grip allows sufficient and fast clamping pressure vs. most other parallel clamps with thin, round, grips.

Update: Further testing with a pressure gauge has indicated many of my Jets are under performing in the pressure category. Wood Magazone did a very good article in the ~Aug 07 issue...if you are in the market for lots of parallel clamps, i suggest reading the test results in this article. The Stanley's actually out performed all the clamps. More pressure = less clamps needed on a glue-up.

The only downside to these Jets are... they have not discounted the price :-) and they are quite heavy vs. any of the other clamps. So if you don't need a lot of clamping pressure, the other less expensive clamps are easier to use if you constantly moving the clamps around the shop... yep, they are that heavy :-) If your pretty strong, it probably wouldn't bother ya much. But with that extra weight, you get the biggest jaws made and the easiest clamps to apply pressure, which often allows you to use less clamps....

24 of 26 people found the following review helpful:

5.0 out of 5 stars Best Clamps I have!, October 5, 2006

By 

J. Wong (Ohio) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: Jet 70411 Parallel Clamp Cabinet Door Set (Tools & Home Improvement)

I received this set of clamps several days ago and have been extremely happy with it! I have several Bessey K-body clamps that I use in my shop but I think these Jet clamps are better!

Basic design is very similar to the Bessey K-body, with parallel jaws and providing 1,000 lbs of clamping power. But the Jet clamps have bettered what Bessey have made.

Plus points of Jet clamps:
Deeper throat depth, 4-1/4" compared to 3-3/8"
Wider jaws, 1-13/16" compared to 1-7/16"
Longer clamp head 6-15/16" compared to 5-1/8"
Adjustable rail stop that slides up and down bar
Length marking along the length of the clamp


The deeper throat and wider jaws allows for more spread out clamping pressure on the parts being clamped. Wider jaws also stabilizes the clamp laterally even more. Also, the sliding rail stop has a slightly wider footprint than the Bessey, giving a very stable clamp. This feature comes in great when you have many clamps that you need to align on a long clamp.

One feature that I also love is the slide guide trigger. It locks the jaw in place which I find very useful because I often forget to tighten the Bessey jaw before hanging it back on the rack. When I take the bessey clamp off the rack, the jaw has slid down the bar and hammered my fingers many times! The Jet holds the jaw in place. One down side is that I have to pull the trigger to adjust the jaw open or close. This may be a little troublesome when you are clamping and want to close the jaw onto the wood. You have ti pull the trigger to close the jaw. It doesn't slide close on it's own like the bessey.

I don't know which is better, but the jet also has a solid composite grip made of composite material with half of it rubberized. It grips extremely well, even when your hands are messy with glue. Glue cleans up easily.

Overall, I love this clamp! Although these clamps are made in China, Don't be fooled because they are very very well made! Solid clamps that will last a lifetime! I think I will have to price my work higher to buy more of these clamps!

13 of 13 people found the following review helpful:

5.0 out of 5 stars Jet 70411 Parallel Clamp Set, April 22, 2007

By 

Nickao - See all my reviews

This review is from: Jet 70411 Parallel Clamp Cabinet Door Set (Tools & Home Improvement)

These clamps are the best, even better then Bessey. I have over 50 of the different Jet parallel clamps and use them side by side with the Bessey every day. After they are tight the Bessey are really difficult to loosen, these jet with the big handle are so much easier on the hands! These DO get discounted! I have purchased them for 1/2 price at a different site many times and just purchase 16 of the 50" clamps for 23.00 each! The combo set I purchased for 89.00! Even here on Amazon I purchased the 98" for 44.00 so keep your eyes open Amazon changes the prices everyday! Check the other woodworking stores, amazon better start offering the same deals or they will lose a ton of sales. Jet clamps rock, but Bessey has a new clamp in the works and I am sure it will rival these or even be better. 129.00 including shipping and NO tax is a great price Amazon I will take more!