Customer Reviews

Jet 709110 FastTrak Drill Press Table

5 star:		(0)
4 star:		(0)
3 star:		(1)
2 star:		(0)
1 star:		(1)

 

 

First of all, you don't get the fence shown in the picture, at least I didn't. Jet say's that is a seperate option...universal fence. So what ya get is a piece of hardboard with melamine on both sides and two standard t-tracks.
I bought this table to put on my Delta DP200(see review), it is meant to mount on the adjustable table and increase your work area. It is a nice thick piece of "wood" and the t-tracks are paralell to each other. But I could have made my own for a third of what this one cost. I have kept it and mounted it to my drill press, and made a good fence for it. I does enable me to use hold downs instead of clamps all the time. Also depending on the press you have, you have to make a cutout on the back side of the board, so your height adjusting crank will clear the table.
It is well made and stout, it does the job but I was disappointed. Recommend you make your own.

In a previous review of this drill press table the reviewer mentioned the fact that the fence shown was not the one shipped. I will go one up on you! I didn't receive the rip fence, hold down clamps or the hardware to install any of them. I opened a large Amazon box that contained only the table itself in a Jet box. That was it. Jet could do nothing for me as far as sending the accessories box and Amazon has still not located anything like it in their inventory. I had to build my own and I'm out the extra time and money.