Jet-Tech Systems built-in booster for superior sanitation. Fully automatic program with wash phase at 150 degree F and final rinse phase at 185 degree F. Capacity: 24 racks per hour. Sanitary labyrinth door elimates need for gasket. Stainless steel wash and rinse arms. Built-in rinse-additive and detergent pump for sparkling results. Body, external housing, wash tank, and all chassis components in brushed stainless steel AISI 304 18/10. Noise 58 dBa due to utilization of double-wall insulated panels. Deep drawn inner wash chamber provide for maximum sanitation. Upper and lower wash and rinse revolving arms constructed of stainless steel; easy to remove and clean without the need for tools. Integrated AISI 18/10 stainless steel booster with insulated lining. Safety micro-switch on the door to interrupt wash pump action. Independently-operated heating elements alternating between booster and wash tank. Alternating heating elements reducing maximum absorption thereby reducing energy costs. Built for free standing installation with side and top panels of. double-walled construction for low heot and noise emissions. Standard insulated top and side panels. Automatic fill and water level regulation of the wash tank. Wash pump protected with filter plus additional shield for tank element. Entire wash tank area protected with perforated stainless steel scrap filters to facilitate maintenance. Door-opening with overall clearance of 12-1/2-inches (32 cm). Slide out integrated front control panel provides eosy access for service. Individual analog thermometer gauges displaying wash and rinse temperatures. Thermostatic control of wash and rinse temperatures ensure optimum results.