Customer Reviews

Kerr Lighting Deck Lights - 4" x 3" - 4 Pack Add On - For Decks, Docks & Stairs

5 star:		(2)
4 star:		(0)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

I bought these to add onto my existing deck lights and just as the first set they work perfect. Did have one tiny issue where the bulb became loose and just had to adjust to get the light back on. They're great and provide just enough ambient light for accent around the permiter of a deck. Should use the white lense cover as a template to cut out the hole and not try to make all the notches to fit very secure. If installed straight down, horizontal to the ground you don't need an extremely tight fitting hole.

We used these to light the steps to our deck by putting them on the risers - the 4 watts is just enough light without being too bright when you are looking right into them. Installation was pretty simple - cut a 3x4 inch hole (used a jig saw). Since the lights are about 1.5 inches deep, I needed to add some 3/4 inch material to the back of each 3/4 inch thick riser to be able to use the provided fastening clamps - no big deal. My only issue was using the provided connectors which were sized for 14 ga or smaller wire. Since I was using 12 ga, the insulation was too fat and would not slide into the connector holes. I used a dremel with a sanding drum to taper the insulation - kind of a nuisance. Otherwise, very pleased and would definitely use them again.