Most helpful positive review
286 of 297 people found the following review helpful
Keurig stamped lid AND the real truth about this item
on December 8, 2012
I read a lot of reviews. This item was available at a lower price and as far as I could tell, it differed from the other Keurig K-Cup Replacement in that it was grey and not in the box.
I ordered it based on a review that said it was Keurig stamped on the lid. When it arrived, I discovered that this was indeed the case.
I imagine that this is sold at a discounted price because, like perfumes and colognes, it's an "open box" item... meaning no box and no instructions. Fragrances sold that way have a generic box for shipping but no fancy packaging and sometimes no cap.
The bad reviews I've seen on the replacement filters for the Keurig simply do not apply to this Keurig product... probably because it was made by Keurig, for Keurig and meant to be quality that would instill loyalty.
1) Reviews saying the lid pops off --- NOT on this one... it twists a partial turn and locks in place... there is no "popping" off while brewing.
2) Reviews saying the filter is too porous and even coarse coffee grinds come through --- NOT with this filter... you can see for yourself that the filter is extremely tight... not only in the picture, but also in the package when you see it for yourself. It is obvious by looking that a fine grind will work in this filter, and it has for me. The tightness of the filter allows the water to truly be forced through, as it should be.
3) Reviews saying that the filter is ineffective because the sides are mesh instead of just the bottom --- NOT an issue... and anyone who has used a conventional coffee maker and a permanent filter knows that the filters are mesh on the sides with a plastic bottom to hold the mesh in place and keep its shape. You have to have a frame for the mesh in order to use the mesh as a filter. Common sense. Certainly not an issue here.
4) Reviews saying the filter doesn't seat properly --- READ all the reviews from people answering back on that one telling people to remove the insert in the Keurig that is there to hold the K-Cups in place. They also tell you that the insert holds firmly in place, so while it acts like it is not meant to be removed, that it is made to be removed and you can read that in your Keurig manual or contact the company for that same How-To information. It only makes sense that if the filter takes the place of the K-Cup and it is inserted in the grey filter holder, that you would have to remove the Keurig holder in order to properly seat this 3-piece replacement.
When in doubt, and when without, head to the Keurg website for information and support... but TO REMOVE THE KEURIG K-CUP HOLDER INSERT, the manual tells you to grasp the top while pushing the bottom up from underneath. It's a simple as using one finger to push up. Trying to pull it out will make this far harder than it really is; it pushes out easily. Once the holder is out, you will remark, "Wow! This looks just like the replacement filter holder!" Amazingly simple. Works like a charm.
I waited on a Keurig until there was a KEURIG K-Cup Replacement Coffee Filter available... because I knew that if Keurig made one, that it would not be the cheaply made junk that so many people have complained about in their reviews.
5-star real deal.... and mine came from WildWin at a great price and shipped IMMEDIATELY! So now I ordered another for the family.
Enjoy with confidence! I am.
Updated 11DEC2012 in response to questions about the filter:
1) To reseat the original K-Cup holder, take notice of the white triangles/arrows that need to be aligned; then, slip that side's clip in first... it's easier to get it to lock in place due to simple physics... when you try to push down on that side last, then you discover that your force is also trying to close the whole holder/basket.
2) Some people say the coffee basket in this replacement is smaller than the K-cups and holds less coffee -- NO, it does not hold less coffee, even though it is smaller than the K-cups... the reason is easily apparent if you take a K-cup apart. Inside of a K-cup is a small paper filter that is "glued" to the top; once removed, you'll realize that it does NOT extend to the bottom... and in fact, holds the same amount of coffee as the replacement filter cup.
3) People comment that the filter should only have a mesh bottom like the K-cups -- this is incorrect because, again, upon opening a K-cup, you'll find a full paper filter, so the coffee only drains from the bottom of the plastic cup... and the plastic cup is there to keep the coffee fresh -- how else could you mimic a paper filter with coffee in a traditional pot, in a single serving, AND keep it fresh??
4) People comment that the coffee grinds spill over -- impossible with the Keurig replacement because the rim of the coffee filter sit ON TOP of the rim of the lower holder AND the top cap locks over top of both rims. Once the replacement holder is in the Keurig, you lower the handle and the water "needle" inserts into the opening and seals against the holder, in the very same manner as it does with K-cups.
Again, for those with comments that differ... make sure 1) you're using it properly and 2) that you're using a Keurig. This product matches up PERFECTLY for the Keurig because it's made and been tested by Keurig... and it's worked perfectly for me.