Customer Reviews

Kreg KJD Replacement Twist Step Drill Bit for Kreg Manual-Pocket Hole Systems

5 star:		(13)
4 star:		(1)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

I purchased the Kreg Pro Pack unit, that comes with this bit. My feeling is that since it is the only one, if for any reason I am in the middle of a project and the tip breaks, or I have any other problem with it, I don't want to be left standing while I wait for another one. So I bought it as a backup.
This bit does a great job, and the Kreg pocket hole systems won top of class award in every category in a recent run off by one of the top woodworking magazines. They won in every size, and every model from the mini on through to the professional bench top.
I don't really anticipate having a problem with the drill bit, but when doing this for a living, you need a parachute, in the event the unusual happens. This bit is built strong, and is rather large, so breakage is not likely, but the tip that protrudes on the end is a lot smaller, and that could possibly break. Additionally, if you are pocket holing all day, the bit could dull, and that would requires a replacement.
Overall highly recommended.

These are tailor-made for drilling pocket holes - not just because of the stepped design, but because of their high-polish, sharpness, and temper. Drilling a lot of pocket holes in a row generates a lot of heat, and these bits hold up to the heat and keep their edge.

If you are replacing a lost bit, be aware that this bit does not include the depth collar, which may be found here: Kreg H9474 Depth Collar w/ Allen® Wrench

Kreg also makes a square shank version, for quick-change bit holders: Kreg Hex Shank Pocket-Hole Drill Bit and a quick change set including the quick-change driving bit: Kreg Quick-Change Pocket-Hole Kit.

Finally, Kreg also makes cobalt steel bits that can be used either in their pocket hole machines or in a hand-held drill. These are exceptionally hard and will hold up to extreme use and high heat. They are expensive, though, and if you are going to use one in a hand-held drill, make sure you buy the right-hand twist version: Kreg DKDB 3/8-Inch Step Twist Drill Bit for Pocket Hole Machines.

Tried other manufacturers but recommend using only this Kreg step drill bit. The metal seems to be harder and the pilot hole a better length than other step drill bits.

Outstanding tool and superior quality. (I needed spare bits - they occasionally dull and on rare occasion, when pushed too hard in very hard wood, the tip may break) I laid my hands on a Kreg Jig about 7 years ago and had to have one. Now it is one of the most used tools in my shop. I build furniture and Cabinets, and have found the quality of my product has increased and the speed of production has trippled. What a Tool, I cannot say enough good about it. Buy one and use it! You will not be sorry.

It is 3/8" in diameter and works very well with Kreg's or similiar make self-boaring screws. You can use with any drill driver. Simple!

These step bits work very well in the pocket hole jig. However, the small diameter tip can break off if one is not careful, so I keep a spare bit on hand.

I have one of the 'generic' pocket hole jigs you can get at most big box home improvement stores. when my original bit broke, I was in the middle of a project on a rare day off, so I had to buy a whole other jig set ($30) in order to keep going. So I decided a spare would be a good idea. This is the best price on a spare bit I could find. The Kreg bit seems to be a little sharper than the generic one that came with my jig, so the generic bit is now my backup.

It's a good idea to keep one extra around. They are good bits, but the tip is definitely the weak point of the entire system. hopefully the kreg bit is a little better made.

I had a bit tip break off on a job, which was frustrating. So, I decided to buy two new bits and keep one as a back-up bit. So far, the first bit is still sharp and still performing well.

I use this tool a lot. I had one break and their customer serve was perfect. I decided to buy a back up.

This is a powerhouse drill bit, it is so strong and sharp I cannot believer the way it just tears into the wood while making my pocket holes. I bought an extra one so I would not be stranded in case it gets dull or it breaks, I do not think it will ever break and as far as getting dull this thing is so sharp and ahs such a strong edge I don't think it will get dull anytime soon.

Great part of the Kreg pocket hole system.