|Item Weight||1.5 pounds|
|Product Dimensions||12.4 x 4.3 x 1.5 inches|
|Item model number||KTRC11|
|Item Package Quantity||1|
KwikTool USA KTRC11 Ratcheting Cable Cutter, 11-Inch
|Price:||$45.49 & FREE Shipping. Details|
|You Save:||$154.50 (77%)|
- Enter your model number above to make sure this fits.
- Simple, one hand operation equipped with 1000-volt insulated handle and quick-release lever
- Fast ratcheting mechanism for easy, clean cuts with low fatigue
- Maximum cutting capacity: copper up to 400 MCM; aluminum and multi-conductor cables up to 600 MCM
- Ratchet tool is 11-Inches in length and has 2-Inch, 51-mm, jaw opening
- Compact and lightweight, can be locked in closed position storage
Frequently Bought Together
Customers Who Bought This Item Also Bought
From the Manufacturer
Top Customer Reviews
However, these will do the job if you are cutting larger strand cable. small strands like battery cable or welding leads will
leave a few strands hanging due to the gap between the cutting edges when closed. Will work ,but just not the tool made in the US. lacks the final critical manufactering tweaking the US made tools carry with their reputation.
This thing is absolutely worthless. Please save your money and do not buy this poor excuse for a tool. As packaged, they worked better as a ratcheting clamp than as a ratcheting cutter. The cutting surfaces were straight from the mill, there was no attempt to sharpen them at all. After sharpening the edges with a die grinder, I discovered that the metal is extremely soft. Not good for something designed to cut large gauge cable. And after just two or three uses, the blades are completely chewed up. As an added bonus the scissoring blades are not flush as they cut which leaves several stray strands left to trim away. just crap...
Do not think you are getting a good deal with this tool, you are spending money for a replica of a good tool. If you absolutely need a ratcheting cable cutter, go purchase a Klein 63060. Yes, it is expensive, but you will have a tool that will last the rest of your life, unlike this piece of garbage.
Most Recent Customer Reviews
A great compact cutter at a great price. Worked well so far up to 500 MCM copper.Published 2 months ago by Terry W. Mosier
Kwik Tool China, it should read. Out of the box the blades are NOT SHARP. They do cut 300, with extreme pressure.Published 2 months ago by Joey D. Hackney
Works great. Obviously not as well constructed as a Klein but doesn't cost as much either. Doesn't fit around 200amp SEC or SER very well but still cut through with some effort. Read morePublished 3 months ago by Dustin Ferrare
AS soon as I start cutting wire, both sets jump the gear. Even after sharpening the blades these cutters are sorry. Read morePublished 3 months ago by Amazon Customer
do not buy these cutter they do not cut good and do not wire over 1.5".Published 3 months ago by Amazon Customer