NOTE: Due to current high demand, this item MAY take up to two weeks for delivery. As Christmas nears, these schedules will be adjusted. NO ORDERS will be filled by Christmas if paid for after NOV. 25
Each of the 16 independent channels can turn on, off, set to a specified brightness, ramp up or down, twinkle, and shimmer. The CTB16PC is a fully assembled 16 channel computer controlled light controller that can handle a total of 30 amps.
INSTALLED VALUE ADDED FEATURES INCLUDE>>>OUTDOOR ENCLOSURE <<<<- High Impact weather resistant Plastic Enclosure
>>>HIGH POWER HEATSINKS<<<- INSTALLED! If you intend to run a 16 channel show, these heatsinks are a MUST. These heatsinks allow you to run at full capacity with out overload shutdowns.
>>>DUAL POWER SUPPLY CORDSET<<< - INSTALLED! The Power Supply Cordset is used to supply power into the controller. 30 Amp (dual set). Cords are 6ft, grounded, 14awg, black, outdoor rated. Cordsets can easily be removed and the unit hardwired for a more permanent installation.
>>>POWER OUTPUT CORDSET<<< - INSTALLED! The Power Output Cordset contains 16 power dangles to get the power out to you your lights. There is one dangle for each of the circuits. Cords are 18in, grounded 18awg, black, outdoor rated.
Comes installed in a weather resistant enclosure allowing it to be used indoors and outdoors.
Note: To use this controller you must also purchase Light-O-Rama Sequencing Software, RS-485 Adapter, and CAT5 Cable.
SOFTWARE PACKAGE is also available from us here on AMAZON
ALSO, Controllers are available on a "as ordered basis". SOME special situations require information on your use and future use needs. We will suggest/aquire adapters when requested. Email request with the following questions answered:
1) Do you want to connect to your PC with a serial port or USB?
2) # of controllers you have?
3) Distance between the PC and the furthest controller?
4) Do you plan to add distance/controllers in the future?