The Lenox Diemaster 2 bimetal band saw blade has a hook tooth design, a positive rake angle, and a raker set for contoured general-purpose cutting on wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel. The hook tooth design has a high raker blade that can be used on materials that produce a discontinuous chip. The teeth are made of M-42 high-speed steel for heat and wear resistance. The blade can make cuts in solid shapes, rectangular tubes, structural shapes, and sheets. It has a flexible back that is suitable for contoured cutting. The blade has a raker tooth set, which alternates between left-leaning, right-leaning, and unset teeth. The constant pitch has uniform tooth spacing and gullet size for general-purpose cutting.
Band saw blades are long, continuous bands of metal that loop around the wheels of band saws and can make straight or curved cuts in metal, wood, stone, plastic, and other materials. When purchasing band saw blades, consider the application, as this will affect the tooth rake, tooth set, pitch, and size of the blade. Band saw blades are available with a positive rake angle or a straight (also called zero) rake angle, and with a raker, wavy, or alternate tooth set. Pitch (the number of teeth per inch or per 25.4 mm) affects the type of finish and may be constant or variable. Band saw blades are available in different lengths and widths to fit the requirements of specific band saws.
Lenox manufactures hand tools, band saw blades, and power tool accessories. The company, founded in 1915, is headquartered in Atlanta, GA.