Customer Reviews

Level Mount ELPM-01 Projector Mount (Black)

5 star:		(4)
4 star:		(3)
3 star:		(2)
2 star:		(1)
1 star:		(0)

 

 

I was a little hesitant to get this mount since I bought an Epson 8350, which is maybe 3 months on the market, but it fits great. Everything on the mount is solid metal and powder coated for a clean finish. I mounted mine in my basement to the rafters and drilled a hole through a drop ceiling tile. looks very clean and professional. My only wish is that you could run cables thru the extension tube. The tube is hollow, the ceiling bracket is hollow, but the universal projector mount part is not. But, for the price, it cannot be beat.

This mount was easy to assemble and looks to be adjustable for any projector. I have it on an Epson 6100 and it is a monster. Comes with different size sets of screws for other projectors too. Saved a ton of money at this price and works as well as the $150 one I was going to buy. As far as any comments about assembly being hard, I would say that is "user error"

Very good. Just make sure you have a stud finder. I don't recommend this product without screwing it into a stud.
Relatively easy to figure out. If you have doubts, find someone who knows better.

I tried a few different projector mounts before I settled on the functionality and simplicity of this one. I like the relative inconspicuousness of this product

I had no problem installing the mount. Screws were wrong size for my projector - but made them work. Were too long and I broke one of the inserts because of over-tightening assuming that the mount came with proper length. Also - was frustrated in the end that my cables would not go through the tube as there is no exit. I'm going to cut an exit with a hack say - but no sense in not creating one for cable to cleanly exit without an additional hole from ceiling.

This is a great product. Very versitile and just what we need to mount our projector at church. Why do I need to write more words when I have already said what I wanted to?

I used this to mount an Optoma HD20 to my ceiling - this projector has several mounting holes, of two different sizes - one large and three small. None of the the bolts (three different sizes) included w/this mount fit the small holes on the projector - they are too large. A quick trip to Home Depot revealed the smallest-sized bolts were likely "8-32" screws - best I could tell, they are 5/8" long. I attempted to use the smallest screws H.D. offered (6-32), and one seemed to mount properly in the projector, but the others I was unsuccessful, and I didn't want to force them in. For the LARGE bolts that came w/the mount, I was more successful - it fit securely & easily. The mounting arms did not mount as "symmetrically" as they appear in the picture (caused by the asymmetrical layout of the mounting holes in the projector), but overall the connection felt secure. I would recommend drilling pilot holes for the ceiling mounting plate, if you are screwing into studs - the mounting screws are pretty large. My ceiling is ~ 9ft. high, and even though I mounted this at the shallowest depth (including the extension tube), it appears to hang low enough that it could be a hazard for taller guests (but easy to reach focus/controls) - I may try to mount this w/out the tube.

Great Product! Installed in under twenty minutes to the wall and works great! No need to spend more money on the more expensive mounts!

As I said, what you pay is what u get.
Pros: cheap, very easy to connect.. multiple options to connect to projector. Everything included in the box.

Cons: provided screws for projector did not match the length so had to get shorter screws. Mount could has only adjustment of 30 degrees vertically. No horizontal adjustment. When I got it mounted first, it was at least 20 degrees cross. I had to play with the alignment for the screws that connect to projector to make it more straight.

I would not recommend this if you were a one-time DIY person.

This is a great projector mount and very solid construction but beware that it is not completely universal and not easy to set up. I bought this to mount my Optoma H65 projector. I suspect the mount is designed for larger (heavier projectors). It comes complete with several different size bolts but not the M3 bolts required for the H65 (hoepfully they can upgrade the kit to include them - finding M3 bolts is not easy). The H65 is a relatively small projector and the mounting bolts are not spaced far apart. Adjusting the "universal" mount to fit was a real brain puzzle and I came close to giving up several times. It would be helpful if they incldued illustration of how to set it up for the most popular projectors.

I'm happy with it now it is installed but it took a LONG time to set it all up.

this ceiling mount is very strong and made of iron, its smooth finish fits in with any decor however I had hoped that it could have a longer extension