• This compact, portable and lightweight wire feed welder plugs into a 115V, 20 amp outlet and is user friendly. Four voltage settings and continuous wire feed speed adjustment allow you to weld mild steel from 24 gauge to 1/8" thick. • 35-88 amps output. • Plugs into household 115V, 20 amp outlet. • Cold contactor safety feature keeps welding wire electrically "cold" until gun trigger is pressed. • Input Power: 115/1/60 • Rated Output: 70A/17V/20% • Input Current: 20A • Output Range: 35-88A • Dimensions (H x W x D): 12.8 in x 8.8 in x 18 in • Included: • Welding gun and cable assembly. • Work cable with work clamp. • Gasless nozzle for flux-cored welding. • Gas nozzle, gas regulator and hose for MIG welding. • 1 lb. spool .035" (0.9mm) Innershield® NR®-211-MP flux-cored wire. • 2 lb. spool .025" (0.6mm) SuperArc L-56 solid MIG wire. • .035" contact tips - quantity 3. • .025" contact tips - quantity 3. • Welding handshield with #10 filter plate and clear glass cover plate. • Chipping hammer/brush.
From the Manufacturer
Interested in welding? Ready to try your hand at wire welding? Have we got the welder for you - the Handy MIG from Lincoln Electric! This compact, portable and lightweight wire feed welder plugs into a 115V, 20 amp outlet and is user friendly. Four voltage settings and continuous wire feed speed adjustment allow you to weld mild steel from 24 gauge to 1/8" thick. And, it's easy to get started since practically everything you'll need to MIG weld is in the box - gun and cable assembly, work cable and clamp, gas nozzle, gas regulator and hose, spool of solid wire, contact tips and hand shield with filter plate and lens. Just add a cylinder of shielding gas. But that's not all - there's also a spool of self-shielded, flux-cored wire, contact tips and chipping hammer/brush so you can use your Handy MIG to weld with gasless, flux-cored wire too.