| Part Number : | 92296 |
| Power Source: | 48.00 battery-powered 9 1 |
| Voltage: | 9 volts |
| Item Package Quantity: | 1 |
| Item Dimensions | |
| Weight: | 2.9 Pounds |
| Length: | 48 inches |
| Width: | 2.40 inches |
| Height: | 1.20 inches |
Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines. You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle. So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

Many versatile options
If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need. The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.
![]() | ![]() | ![]() |
Simple to use
SmartTool permits you to find level and plumb in two ways. For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module. It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't. So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be. And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).
Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool. Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.
Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections,
Hold
The hold button makes it easy to measure in areas where the digital display is not visible. Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.
Product Details
Would you like to update product info or give feedback on images?
|
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
19 of 20 people found the following review helpful:
5.0 out of 5 stars
This Level is a MUST HAVE for serious contractors,
By
Amazon Verified Purchase(What's this?)
This review is from: M-D Building Products 92296 SmartTool 47-1/4-Inch Digital Electronic Level (Tools & Home Improvement)
I am a general contractor and take pride in the precision that we perform layout and construction. Having purchased this SmartTool (48 inch) with Digital Module a year ago, I could not do without it. It works great as a standard level (has the standard glass bubbles that are very accurate.) It works better to measure slopes or record slopes (you can hold a slope without looking at it, take it off the slope and read the stored slope). The audible is very sensitive, at times frustrating, because it so accurate. It will not "beep" until you are at and holding 0.00 degrees. We have dropped it, left it the rain, submersed it in mud at footings . . . while the manufacturer does not recommend this. To restore it to it's normal operation, the worst we had to do was replace the 9 volt battery and/or recalibrate the level (directions are simple and included).
Also consider adding to your toolbox (in addition, not instead of this tool) an INCLOMATIC 680 by Checkpoint Professional. This is a small 6 inch level that is a must for your tool belt with a built in laser. The accessory kit allows you to split the laser beam, project perfect 90 degree angles or create a laser plane. It would not be a good substitute for the SmartTool with Module since it must be read up close and lacks the bubbles.
12 of 12 people found the following review helpful:
2.0 out of 5 stars
Fair weather friend,
By "justanobuddy" (Groton, CT United States) - See all my reviews
This review is from: M-D Building Products 92296 SmartTool 47-1/4-Inch Digital Electronic Level (Tools & Home Improvement)
Works great as long as the temperature is above 40 degrees Ferenheit. Once it gets below that you'll be forced to use the bubbles or you'll spend your day fighting this thing to get a consistent reading. (now I know why they put the bubbles in).Evidently those who rate this item high work in a mild climate. I don't. Lately the unit doesn't even want to calibrate in the vertical direction so I can't even use it above 40 degrees. Unfortunately I'll be sending it in for warrenty repair. When it works, it's nice. (Emphasis is on when it works.)
11 of 12 people found the following review helpful:
5.0 out of 5 stars
48" Smart Level,
By "naperaero" (Naperville, IL USA) - See all my reviews
This review is from: M-D Building Products 92296 SmartTool 47-1/4-Inch Digital Electronic Level (Tools & Home Improvement)
This is a fantastic tool and a treat to have in the shop. I've found that as a standard level it is very accurate - then when using in digital mode it is terrific. The display is very easy to read and shuts off automatically when you forget about that duty. Calibration is easy and straight forward. I originally purchased this for some rigging on an airplane but now it has found its way into my regular shop life. I'm now purchasing an additional Smarttool module to use in those hard to access areas. Treat yourself to this tool. TA
Share your thoughts with other customers: Create your own review
|
|
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|