A spreadable, non-corrosive, translucent paste. Excellent for the sealing and bonding of electronic components onto printed circuit boards and protecting copper connections on electronic parts assemblies. Excellent as a weather proofing sealant where power cords enter motors. Use as a gasket for leak resistant sealing and insulating. Retains elastomeric properties for long periods at temperatures from -60 degree C to 204 degree C (-75 degree F to 399 degree F). Recommended for marine applications. Features high strength, non-corrosive. 1.04 specific gravity. 15 min tack free time. 12 - 24 hours cure through time. 21 (Shore A) hardness. 1.896 MPa (275 psi) tensile strength. 500 percent elongation. 7.1 kg/cm (40 lb/in) tear strength. 8 kg/cm (47 lb/in) peel strength. 2 x 10(15) ohm.cm volume resistivity. 16.8 kV/mm, 425 V/mil dielectric strength. 2.8 at 100 Hz dielectric constant. 0.06 W/m. degree K thermal conductivity. -60 degree C (-75 degree F) brittle point. 3.0 x 10(-4) mm/mm/ degreee C. 480 g/min Viscosity (at 25 degree C). Excellent chemical resistance. Modified alkoxy (neutral) cure. Primerless adhesion. UL HB Recognition and UL File No. E36952. ROHS Compliant.