MK Diamond 153330 MK-660K 3/4 Horsepower 7-Inch Wet Tile Saw

by MK Diamond

Product Description

Product Description

The MK-660 has a powerful 3/4-horsepower direct-drive DC motor that spins the blade at 3,500 rpm. The depth of cut is 2 inches at 90 degrees and 1-1/8 inch at 45 degrees. The MK-660 has the capacity to rip tiles up to 14 inches and diagonally cut 10-inch tiles. New motor design technology allows the MK-660 to run remarkably quietly. The high torque motor is powerful enough to deliver fast cutting on tile up to 14 inches. A specially designed blade brake stops the blade within a quarter of a turn. A chrome-plated linear guide bar system ensures precision alignment and accurate cutting. The MK-660 is made with a solid-steel frame for durability, yet at only 50 pounds it's very lightweight and portable, so you can easily take it to any job site.

From the Manufacturer

The MK-660 has a powerful 3/4-horsepower direct-drive DC motor that spins the blade at 3,500 rpm. The depth of cut is 2 inches at 90 degrees and 1-1/8 inch at 45 degrees. The MK-660 has the capacity to rip tiles up to 14 inches and diagonally cut 10-inch tiles. New motor design technology allows the MK-660 to run remarkably quietly. The high torque motor is powerful enough to deliver fast cutting on tile up to 14 inches. A specially designed blade brake stops the blade within a quarter of a turn. A chrome-plated linear guide bar system ensures precision alignment and accurate cutting. The MK-660 is made with a solid-steel frame for durability, yet at only 50 pounds it's very lightweight and portable, so you can easily take it to any job site.

Product Details

Product Manual [2.82mb PDF]

• Shipping Weight: 97.6 pounds
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B00002245V
• California residents: Click here for Proposition 65 warning.
• Item model number: 153330
• Average Customer Review: 3.6 out of 5 stars  See all reviews (11 customer reviews)
• Amazon Best Sellers Rank: #315,400 in Home Improvement (See Top 100 in Home Improvement)
• Discontinued by manufacturer: Yes

Customer Reviews

Most Helpful Customer Reviews

39 of 40 people found the following review helpful:

4.0 out of 5 stars The MK-660k is a fine tile saw, January 29, 2001

By 

Richard Roybal (Cheyenne, WY United States) - See all my reviews

This review is from: MK Diamond 153330 MK-660K 3/4 Horsepower 7-Inch Wet Tile Saw (Tools & Home Improvement)

The MK-660K tile saw is a beautiful machine. Not only in looks but also the way it cuts through tile like its butter. The saw sets up quickly and with the free folding stand makes any size job less effortless. This saw has many features the profesional or do-it-yourselfer will appreciate, from the removeable water reservoir, which makes clean up very easy. To the lightwieght of the unit which makes getting it to the jobsight easy. the reason I gave it 4 stars is because, when cutting 1/2 inch off of a 12 inch tile on the left hand side of the blade the tile runs into the frame that holds the motor.

14 of 14 people found the following review helpful:

4.0 out of 5 stars Great Saw, May 19, 2002

By 

Jason Sturm (Auburn, MI United States) - See all my reviews

This review is from: MK Diamond 153330 MK-660K 3/4 Horsepower 7-Inch Wet Tile Saw (Tools & Home Improvement)

This saw cuts tile like a champ. Quick setup and easy use with very solid construction. If the stand is not included with the saw when you buy it, make sure to buy that also, it is a must-have. My only other experience with a wet tile saw was with the el-cheapo model from [local store], there is no comparison between that saw and the MK-660. The only reason I didn't give this saw 5 stars is because it did not include a fence for making diagonal cuts. In a higher-end saw such as this, I would have expected that this relatively inexpensive accessory would have been included.

15 of 16 people found the following review helpful:

4.0 out of 5 stars Quite Saw, October 13, 2002

By 

Kenny Brutcher (Greensboro, NC USA) - See all my reviews

This review is from: MK Diamond 153330 MK-660K 3/4 Horsepower 7-Inch Wet Tile Saw (Tools & Home Improvement)

Well let me start by saying that my old saw was a MK370.
The difference between the two was night and day,on the rails the 660 was 100 times more accurate than the 370 .Its alot more smoother and alot quiter.What I found was the 660 was alot more messy ,I mean that I could not set this saw up in the house I was working in like in the past.Sure I alwayse had to put a tarp down and rig a back spalsh but it was ok.The 660s table is not as deep as the 370 so you have to hold the tile more firmly.I miss the extra clearence under the saw the 370 had,for freehanding cuts.the pump is alot bigger and better.the saw seems to have as much power as the 370 but its alot smoother.
I am glad I got this saw as a up grade to the 370 and would buy again.Cant see my self buying one of those 100 lb saws to do all the tile I do,just seems like a whole lot of work for the normal 10 or 12 cuts you have to saw ,and cant brake.Mabey if I was doing 18" marble I could afford a helper to carry my saw for me(:All around a great saw ,just remember this saw was a 7" not a 10".I think for a 7" its top notch.Dont be afraid to buy this saw.