MK Morse CSM736SC Metal Devil 7-Inch 36 Tooth Steel Cutting Saw Blade with 5/8-Inch Arbor

by MK Morse

Product Description

Amazon.com

0-degree tooth rake for steel
7-degree tooth rake for thinner & softer metals like aluminum.

Specialized Blade Configurations
The Morse Metal Devil cuts through tough metals quickly and smoothly due to it's unique combination of manufacturing quality, metallurgy and blade configuration.

TCG (Triple Chip Grind) Cutting Tip Configuration makes all tips strong since the load is shared between teeth. This maximizes the resistance of each tooth to chipping.

Blades with more teeth are used for finer cuts and to cut thinner materials.

Blades for cutting steel have 0 degree rake. This configuration creates a stronger tooth with more carbide where the cut is being made. Blades for cutting softer aluminum and thinner metals have 7-degree rake. This creates a more foreward cutting action.

Fewer seconds per cut.

More than 700 cuts through 12-inch by 3/8-inch aluminum plate. Our testers wore out before the blade did.

Cuts Metal Faster
The Morse Metal Devil cuts through steel, iron and aluminum with minimal frictional drag. Consequently, the time savings are dramatic and important to anyone trying to get more done in less time.

In laboratory tests, the Metal Devil cut through 6-inch by 1/4-inch thick steel plate in less than 12 seconds on the first 20 cuts.

Cuts Metal Longer
The unique metallurgy of the carbide tips and hardened steel inner plate combined with the configuration of the teeth and manufacturing quality create a circular saw blade that makes more cuts in metal than other blades you attach to a circular saw.

After watching a Morse Metal Devil; blade make 700 cuts in 12-inch by 3/8-inch Aluminum Plate, our laboratory testers wore out before the blade. Tests cutting angle iron and steel plate also showed that the Metal Devil can be expected to deliver long life performance on virtually any metal-cutting application.

Cutting through angled steel.

Cutting through corrugated aluminum.

The Importance Of Being Cool
A big factor in its superior perforance is that the Metal Devil cuts cool and therefore does not melt aluminum along the cut line. The unique metallurgy and tip geometry of the blade and cutting tips means that virtually no heat is transferred to the inner plate or the material being cut.

Cool Cutting Means Safer Cutting
Imagine cutting through a piece of solid steel then immediately picking up the pieces by the cut edge. With the Metal Devil you can do it. Think of how much time you'll save without having to wait around for parts to cool before you pick them up.The Morse Metal Devil also minimizes the sparks generated when cutting. With limited sparking and cool cutting action, the chance of sparks smoldering in nearby materials or of being burnt when picking up a freshly cut part are eliminated.

Cool Cutting Means Cleaner Edges
Cool cutting means that painted surfaces will not melt at the cut, leaving paint right to the edge. This is especially helpful when cutting prefabricated building materials such as metal roofing and siding.

Product Description

The Metal Devil saw blade is the fastest, easiest, and coolest way to cut through ferrous and nonferrous metals. Metal Devil blades have hardened steel plates for durability. The blades cut cool and do not transfer heat to the inner plate, so you can pick up cut parts immediately after cutting. Metal Devil blades cut with virtually know sparks and leave a nice clean edge on the cut. The Metal Devil blades cut a variety of material from stainless steel, aluminum, steel, and thin steel. No. CSM53830SC: 5-3/8" 30T steel cutting Metal Devil blade 10mm to 20mm arbor No. CSM53850TC: 5-3/8" 50T thin steel Metal Devil blade 10mm to 20mm arbor No. CSM736SC: 7" 36T steel cutting Metal Devil blade 20mm arbor No. CSM768TSC: 7" 68T thin steel cutting Metal Devil blade 20mm arbor No. CSM7240SC: 7-1/4" 40 steel cutting metal Devil blade 5/8" - KO* arbor No. CSM725600AC: 7-1/4" 60T aluminum Metal Devil blade 5/8" - KO* arbor No. CSM72568TSC: 7-1/4" 68T thin steel cutting Metal Devil blade 5/8" - KO* arbor No. CSM850SC: 8" 50T steel cutting Metal Devil blade 5/8" arbor No. CSM868TSC: 8" 68T thin steel cutting Metl Devil blade 5/8" arbor No. CSM948SC: 9" 48T steel cutting Metal Devil blade 1" arbor No. CSM968TSC: 9" 68T thin steel cutting Metal Devil blade 1" arbor No. CSM1052TSC: 10" 52T thin steel cutting Metal Devil blade 5/8" - KO* arbor No. CSM1472SC: 14" 72T steel cutting Metal Devil blade 1" arbor

See all Product Description

Product Details

• Item Weight: 1 pounds
• Shipping Weight: 1.4 pounds (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• ASIN: B000E8HTUC
• Item model number: CSM736SC
• Average Customer Review: 1.0 out of 5 stars  See all reviews (1 customer review)
• Amazon Best Sellers Rank: #267,383 in Home Improvement (See Top 100 in Home Improvement)

Customer Reviews

Most Helpful Customer Reviews

1.0 out of 5 stars WRONG ARBOR SIZE, October 13, 2008

By 

A. Epstein - See all my reviews
(REAL NAME)   

This review is from: MK Morse CSM736SC Metal Devil 7-Inch 36 Tooth Steel Cutting Saw Blade with 5/8-Inch Arbor (Tools & Home Improvement)

The CSM736SC has a 20mm arbor hole. Until Amazon changes the description, you will get the wrong arbor size if you were expecting 5/8. The MK Morse CSM72540SC IS A 40 tooth blade with a 5/8 arbor.

I purchased a Freud BL71MGW9 bushing to adapt the 20mm arbor hole to 5/8".