From the Manufacturer
Much safer and more accurate than standing wide stock on edge. The New multiple routing operation Horizontal Router Table makes tall auxiliary fences, multiple featherboards or jigs unecessary. You can quickly and easily make mortise and tenon joinery, raised panels with vertical raised panel bits, moldings and picture frames. This benchtop table features micro adjustable bit height adjustments. One 1/16 of an inch per turn allows for very precise adjustments: (1/4 turn = 1/64-Inch, 1/2 turn = 1/32-Inch, 3/4 turn = 3/64-Inch). The table is 24-Inch wide, 20-Inch deep and 25-Inch height with a sturdy 3/4-Inch thick MDF core, durable melamine surface and polyethylene plastic edges.The 3/4-Inch thick MDF core with melamine surface extension fences, on both sides of the router plate, support long stock and give maximum stock support. The 3/8-Inch thick, 11-3/4-Inch x 11-1/2-Inch router plate is held in routing position by sturdy aluminum extrusions, along with two locking knobs which safely secure the sliding router plate in position. Use with 3 HP routers or less. Raise or lower your router up to 2-1/8-Inch below or 2-3/8-Inch above the table.