The Makita 3 1/2in. Framing Nailer has a large-capacity air chamber for increased power to drive plastic or wire-coated nails varying in length from 2in. to 3 1/2in., yet is compact enough to fit between standard 16in. framing studs. Integrated 3-mode selector switch bounce, sequential, lock allows user control over firing options, while the 'tool-less' depth adjustment with 9 settings allows user to drive nails to the precise level on the wood's surface. Operating PSI 65-120, Case Included No, Fastener Size gauge 113-0.162, Tool Length in. 22, Fasteners Used Round head nails, Inlet Size in. 1/4 or 3/8, Adjustable Depth Control Yes tool-less, Coil or Strip Coil, Min. Hose Size in. 1/4, Fastener Sizes in. 2-3 1/2, Fastener Capacity Per Strip 64-74, Tool Weight lbs. 8.7. Built-in air filter minimizes dust and debris from entering tool To prevent dry firing, tool stops when three nails remain in the magazine Retractable hook allows tool to remain close-by, but never in the way Sharp, pronounced spurs grip wood for controlled firing at an angle Durable rear loading aluminum magazine has large nail holding capacity Rubber bumpers protect the tool and surface from damage Exhaust port directs exhaust air away from user Rubber grips for better control and comfortable handling
From the Manufacturer
3- Mode Selector switch allows user control over firing options, Quick 2-step loading process reduces downtime, Built-In air filter minimizes dust and debris from entering tool.