Materials Science and Engineering: An Introduction [Hardcover]

William D. Callister (Author), David G. Rethwisch (Author)

Book Description

Publication Date: December 29, 2009 | ISBN-10: 0470419970 | ISBN-13: 978-0470419977 | Edition: 8

Building on the success of previous editions, this book continues to provide engineers with a strong understanding of the three primary types of materials and composites, as well as the relationships that exist between the structural elements of materials and their properties. The relationships among processing, structure, properties, and performance components for steels, glass-ceramics, polymer fibers, and silicon semiconductors are explored throughout the chapters. The discussion of the construction of crystallographic directions in hexagonal unit cells is expanded. At the end of each chapter, engineers will also find revised summaries and new equation summaries to reexamine key concepts.

Editorial Reviews

Review

Solutions Manual, Transparencies and Interactive Simulation Software Package available. -- The publisher, John Wiley & Sons --This text refers to the Software edition.

From the Publisher

An outstanding text reflecting the latest developments in the field. This edition contains a new chapter titled Case Studies in Materials Selection which includes five different examples--a cantilever beam, an automobile valve spring, the artificial hip, the space shuttle's thermal protection system and packaging for integrated circuits--relative to materials employed and the rationale behind their use. These case studies are comprehensive in coverage and feature numerous engineering disciplines. New material on novel diamond thin films and the recently discovered carbon fullerenes plus a discussion of the Hall effect have been added. --This text refers to an out of print or unavailable edition of this title.

See all Editorial Reviews

Product Details

• Hardcover: 992 pages
• Publisher: Wiley; 8 edition (December 29, 2009)
• Language: English
• ISBN-10: 0470419970
• ISBN-13: 978-0470419977
• Product Dimensions: 10.3 x 8.3 x 1.5 inches
• Shipping Weight: 4 pounds (View shipping rates and policies)
• Average Customer Review: 4.5 out of 5 stars  See all reviews (45 customer reviews)
• Amazon Best Sellers Rank: #6,923 in Books (See Top 100 in Books)
  • #87 in Books > Professional & Technical > Engineering

More About the Author

Discover books, learn about writers, read author blogs, and more.

Customer Reviews

Most Helpful Customer Reviews

23 of 24 people found the following review helpful:

5.0 out of 5 stars If you're interested in this topic, this is the 1st choice!, June 3, 2004

By 

Dr. Leslie Brown "Doc Brown" (Tenerife, Spain, Canary Islands.) - See all my reviews

This review is from: Materials Science and Engineering: An Introduction (Hardcover)

This is a terrific book on the subject of Materials Science.
This is the sort of book more engineers should read, as they lack knowledge in this department. It covers metals, ceramics, plastics and composites as well as briefly covering other materials such as semiconductors. It talks about fabrication processes, microstructures as well as the properties of typical materials - for example with metal alloys, casting, forging etc are discussed as well as phase diagrams.

The last section discusses the application of various materials for use in several different parts. In the edition I have, they are automobile valve springs, an artificial femoral component, and space shuttle tiles, as well as the strength-weight optimisation of various beams. It goes into each aspect of the design, for example how many stress cycles the valve will undergo in the typical lifetime, and give a specific failure rate. Quite interesting.

There are also sections on thermal properties, electrical properties, atomic lattices, and more... I can't remember, it's been a while since I last looked through it properly. In summary, this book is packed with sufficient information to give you general knowledge of each field covered and get you interested, without going overboard -something that most university textbooks tend to do.

15 of 15 people found the following review helpful:

4.0 out of 5 stars An excellent sophomore text, May 31, 2000

By 

Gregory P. Casavant (USA) - See all my reviews

This review is from: Materials Science and Engineering: An Introduction (5th Edition) (Hardcover)

I purchased this book for a course in materials science. The course was structured as an independent study. I was responsible for studying the materials and I would take quizzes through e-mail. This book was my primary source of instruction for the course. Where the book could not support me in the quizzes, it was necessary to seek information elsewhere. My judgement of this book, therefore, is based on its thoroughness, mathematical rigorousness and its ability to explain concepts. Most of the topics covered in the course were well presented by the book. In particular, chapter 3, on the Structure of Crystalline Solids, was very well done. In general the writing style is good. The use of many figures and diagrams enhanced the explanations of physical phenomenon. I highly recommend it for an intuitive viewpoint into material science. Where the book falls down is in the realm of calculation. There are too few formula given. Where they are given, there are too few examples on their use. Chapter 6 on the Mechanical Properties of Metals, and chapter 9 on Phase Diagrams, are sections that failed in this regard. However, the books lack of over-reliance on formula and mathematics is a great enhancement for those just beginning an exploration of the science or a career in engineering. Too many numbers on a page would be a discouragement to those wishing to enjoy the material. Therefore, I would recommend this book as a sophomore level introduction to Material Science, for which, in fact, it has been written.

23 of 27 people found the following review helpful:

3.0 out of 5 stars Okay, not great, March 18, 2003

By 

Elim Garak (Australia) - See all my reviews

This review is from: Materials Science and Engineering: An Introduction (Hardcover)

Materials by Callister is a detailed, yet verbose book. I used it as a textbook for a 1st year Materials course at university, and while the book contains a lot of detail, most of it is contained within great slabs of written language, often without the aid of diagrams.

This may be fine for senior undergraduate or postgraduate students, but for beginner students it simply isn't the way to teach a subject. My suggestions for future editions would be to tone down the language to a more basic level, and to include more diagrams to aid the student in conceptualisation.