Unique-pH multi-purpose solution is a proprietary sterile, aqueous solution buffered to approximate the pH and tonicity of the eye.
It contains hydroxypropyl guar, a proprietary wetting/conditioning polymer system, polyethylene glycol, tetronic 1304 (tetronic is a registered trademark of BASF), boric acid, propylene glycol, and is preserved with polyquad (polyquaternium-1) (0.0011%), and edetate disodium (0.01%).Directions
This container is manufactured using Blow-Fill-Seal technology. The dropper tip is sealed. To open, screw the cap clockwise as far as it will go. The spike inside the cap will pierce the seal.
? Always wash and rinse your hands before handling your contact lenses.
? Always handle one lens, left or right, first in order to avoid mix-ups.
? Use only the solutions recommended by your eye care practitioner.
? Remove imprinted seal around bottleneck completely before use.
STEPS FOR PROPER DISINFECTION:
In order to provide appropriate care for your lenses the following steps must be completed each time you remove your lenses. Do not skip any step.
Step 1: Cleaning
Rub both sides of the lenses carefully with 2 to 4 drops of Menicon Unique-pH Multi-Purpose Solution. Be sure to clean each
side of the lens.
Step 2: Rinsing
Thoroughly rinse with the Menicon Unique-pH Multi-Purpose Solution or another rinsing solution recommended by your eye care practitioner.
Step 3: Conditioning and Storage
Place each lens in the correct side of the lens storage case, then fill each chamber with fresh Menicon Unique-pH Multi-Purpose Solution completely covering the lenses. Close the case tightly. Store the lenses in Menicon Unique-pH Multi-Purpose Solution for at least four hours prior to wearing your lenses. Store your lenses in the unopened case until ready to wear, up to a maximum of 30 days.
? Lenses may be removed from the storage case and placed directly into your eyes. For extra cushioning, a drop of the Menicon Unique-pH Multi-Purpose Solution may be added to the inside of each lens prior to insertion.
? To prevent contamination and help avoid serious eye injury always empty and rinse your lens storage case with fresh solution
and allow it to air-dry. Refill the case with fresh Menicon Unique-pH Multi-Purpose Solution immediately before the next use of
the caseLegal Disclaimer
Actual product packaging and materials may contain more and different information than what is shown on our website. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using or consuming a product. Please see our full disclaimer