The Mettler Toledo MS4002SDR NewClassic MS delta range precision balance has 0 to 0.82kg and 0.82 to 4.2kg weighing capacities with accuracies of 0.01g and 0.1g (also called readability), a 1.5-second settling time for increased productivity, and a stainless steel corrosion-resistant weighing pan. The internal calibration system automatically calibrates the balance based on the temperature, or at a predetermined time, ensuring consistent, accurate measurements. The below-balance weighing hook suspends bulky items beneath the balance for weighing. This balance is rated to IP54 level of protection against dust and splashing water during use.
The balance has a high-contrast display for readability, weighs in 16 different units and tares over the entire weighing range, and displays in seven different languages: English, German, Spanish, French, Italian, Polish, and Czech. The built-in time and date function enables work in compliance with good practices in many industries, including food and pharmaceutical. Three programmable buttons provide shortcut access for routine tasks. RS232 and USB ports are available for easy connection to a printer, computer, or bar code reader. Fixable rear support feet offer stability, so the balance will not tip under eccentric loads, while overload protection prevents damage to the weighing cell and the balance if too-heavy samples are mistakenly used. The high-grade, chemical-resistant, die-cast aluminum housing protects the internal weighing cell from environmental influences and impacts, and reduces the effects of thunderstorms and electromagnetic interference from other equipment that may affect measurement results. A protective cover safeguards the balance during storage.
|Repeatability (at nominal load)||0.06/0.01g|
|Sensitivity temperature drift (10 to 30 degrees C)||3ppm/degrees C|
|Settling time||1.5 seconds|
|Pan dimensions||170 x 200mm/6.70 x 7.87 inches (W x D)|
|Balance dimensions||96 x 194 x 347mm/3.78 x 7.64 x 13.66 inches (H x W x D)|
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Balances are measuring instruments used to determine the mass of an object, while scales are used to measure the weight of an object. The measurement results from balances are generally considered to be more precise compared to results from scales. Mechanical balances are the simplest type of balance, and use a lever and slide to indicate the measurement. Conventional balances are commonly used in offices, the jewelry industry, and in kitchens, and display results digitally, but are less precise than analytical balances. Analytical balances measure to a high degree of precision and accuracy (0.0001g or better), and display results digitally. These balances have a cover with doors to prevent dust and airflow from affecting the measurement. Moisture balances analyze moisture content in a material sample, using infrared or halogen heat sources to dry the sample and then calculate the moisture content from the before- and after-drying weight, and display results digitally, on the balance, or transfer the information for display on a computer.
Mettler-Toledo manufactures precision instruments for use in research, scientific, and quality control labs for the pharmaceutical, chemical, food, and cosmetics industries. The company, founded in 1989, is headquartered in Switzerland.
What's in the Box?
- Mettler Toledo MS4002SDR NewClassic MS dual-range balance
- Protective cover
- Below-balance weighing hook
- 1.5 meter-long 12 V power supply with universal plug